High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publication de 4 numéros par an
ISSN Imprimer: 1093-3611
ISSN En ligne: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
Multiple-Beam Materials Processing
Volume 4,
Numéro 2, 2000,
18 pages
DOI: 10.1615/HighTempMatProc.v4.i2.70
RÉSUMÉ
Multiple-beam processing is a relatively new field that has the potential to enhance the capabilities of high intensity laser and electron beam processes. This paper presents a review of work done in this area to date. It focuses on multiple-beam welding, where it has been most extensively applied. The multiple-beam laser preheating and postheating concept is first presented and analyzed. This is followed by multiple-beam flow control, which has thus far been applied mainly to electron beam welding. Arc-augmented laser welding is then outlined, and finally, other applications involving laser machining and cladding.
287 Vues d'articles
12 Téléchargements d'articles
Métrique
Articles avec un contenu similaire:
Dernier numéro
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Prochains articles
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products