Journal of Enhanced Heat Transfer
Publication de 8 numéros par an
ISSN Imprimer: 1065-5131
ISSN En ligne: 1563-5074
IF:
2.3
5-Year IF:
1.8
Immediacy Index:
0.2
Eigenfactor:
0.00037
JCI:
0.6
SJR:
0.433
SNIP:
0.593
CiteScore™::
4.3
H-Index:
35
Indexed in
Numerical Behavior of Mixed Convection in a 2D Channel with a Co-Flowing Fluid Injection from a Flat Nozzle
Volume 17,
Numéro 4, 2010,
pp. 353-368
DOI: 10.1615/JEnhHeatTransf.v17.i4.60
RÉSUMÉ
In this paper, a numerical investigation which concerns a mixed convection flow in a two-dimensional vertical heated channel is performed. This flow results from the mixing of the up-going fluid along the channel walls with the one issued from a flat nozzle located at its entry section. The system of governing equations is solved with the finite volume method together with an implicit scheme. The obtained results prove the activation of heat transfer by the combined effect of turbulence and jet-wall interactions. This activation is also realized by the drive of ambient air by the jet.
366 Vues d'articles
12 Téléchargements d'articles
Métrique
Articles avec un contenu similaire:
Dernier numéro
EXPERIMENTAL AND THEORETICAL CHARACTERIZATION OF TWO-PHASE FLOW DISTRIBUTION IN UNBALANCED FLOW NETWORKS
FIELD EXPERIMENTAL INVESTIGATION OF THE INSULATION DETERIORATION CHARACTERISTICS OF OVERHEAD PIPELINE FOR STEAM HEATING NETWORK
FLOW AND HEAT-TRANSFER CHARACTERISTICS IN SMALL-DIAMETER TUBE BUNDLES WITH A STAGGERED LAYOUT: AN EXPERIMENTAL STUDY
A PARAMETRIC AND COMPARATIVE STUDY ON BARE-TUBE BANKS AND NEW CAM-SHAPED TUBE BANKS FOR WASTE HEAT RECOVERY APPLICATIONS
POOL BOILING HEAT TRANSFER CHARACTERISTICS OF POROUS NICKEL MICROSTRUCTURE SURFACES
Prochains articles
Flow Boiling Heat Transfer in Microchannel Heat Exchangers with Micro Porous Coating Surface
Enhancement Evaluation Criteria for Pool Boiling Enhancement Structures in Electronics Cooling: CHF Enhancement Ratio (ER-CHF) and Enhancement Index (EI)
Influence of transient heat pulse on heat transfer performance of vapor chamber with different filling ratios
Effect of Geometrical Parameters on the Thermal-Hydraulic Performance of Internal Helically Ribbed Tubes
Condensation heat transfer in smooth and three-dimensional dimpled tubes of various materials
In Memoriam of Professor Ralph L. Webb on the anniversary of his 90th birthday
Analysis of the Single-Blow Transient Testing Technique for Non-metallic Heat Exchangers
Evaluation of Heat Transfer Rate of Double-Layered Heat Sink Cooling System with High Energy Dissipation
Experimental Investigation on Behavior of a Diesel Engine with Energy, Exergy, and Sustainability Analysis Using Titanium Oxide (Tio2) Blended Diesel and Biodiesel
COLLISION MORPHOLOGIES OF SUPERCOOLED WATER DROPLETS ON SMALL LOW-TEMPERATURE SUPERHYDROPHOBIC SPHERICAL TARGETS
Pool boiling heat transfer characteristics of porous nickel microstructure surfaces
Field experimental investigation of the insulation deterioration characteristics of overhead pipeline for steam heating network
A parametric and comparative study on bare-tube banks and new-cam-shaped tube banks for waste heat recovery applications