Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 0.404 Facteur d'impact sur 5 ans: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018027061
pages 519-543

NUMERICAL STUDY OF THERMAL ENHANCEMENT IN MODIFIED RACCOON MICROCHANNELS

Nishant Tiwari
Department of Mechanical Engineering, National Institute of Technology Rourkela, Rourkela 769008 (Odisha), India
Manoj Kumar Moharana
Department of Mechanical Engineering, National Institute of Technology Rourkela, Rourkela 769008 (Odisha), India

RÉSUMÉ

An improved design of raccoon microchannel heat sink with a combined change in wave amplitude and wavelength along the channel length is proposed in this work. A three-dimensional conjugate heat transfer model studies the characteristics of fluid flow and heat transfer numerically. The total channel length is divided into three zones of equal length where the channel expansion factor (α) and waviness (γ) are varied in each zone to create six sets of modified raccoon microchannels (MRMC). The results indicate that changing the waviness (γ) along an equally divided length of the channel in MRMC contributed to disturbance of the core fluid region and intensified the mixing of laminar boundary layer that enhances the thermal performance of the microchannel. The assessment of MRMC is based on the thermal performance factor (η), and the results indicate that there exists an optimal combination of wave amplitude and wavelength arrangement along the channel length, which has an additive effect on the thermal performance. The Nusselt number and friction factor of the new heat-sink design is well demonstrated by comparison with the simple raccoon microchannel (SRMC). In addition, a wide range of parametric variations is also considered to indicate the axial wall conduction effect in raccoon microchannels.


Articles with similar content:

THERMOHYDRAULICS OF TURBULENT FLOW THROUGH SQUARE AND RECTANGULAR DUCTS WITH TRANSVERSE RIBS AND TWISTED TAPES WITH AND WITHOUT OBLIQUE TEETH
Journal of Enhanced Heat Transfer, Vol.18, 2011, issue 4
Sujoy Saha
FLOW AND HEAT TRANSFER CHARACTERISTICS OF A FIN-AND-TUBE HEAT EXCHANGER WITH WAVY RIB INSERTS
Journal of Enhanced Heat Transfer, Vol.23, 2016, issue 6
Yongping Yang, Xiaoze Du, Li Li, Lijun Yang, Gaosheng Wei
VERTICAL FLUTED TUBE CONDENSER PERFORMANCE PREDICTION
International Heat Transfer Conference 7, Vol.11, 1982, issue
C.G. Barnes, Jr., Warren Max Rohsenow
Thermal and Friction Characteristics of Laminar Flow through Square and Rectangular Ducts with Transverse Ribs and Twisted Tapes with and without Oblique Teeth
Journal of Enhanced Heat Transfer, Vol.17, 2010, issue 1
Sujoy Saha, P. K. Pal
TWO-PHASE FLOW ANALYSIS OF A DOUBLE LAYER COUNTER FLOW MINI-CHANNEL HEATSINK WITH 1D COUNTERCURRENT FLOW MODEL
International Heat Transfer Conference 16, Vol.4, 2018, issue
Jaeseon Lee, Junbeom Lee, Kihoon Lim