Heat Transfer Research
Publication de 18 numéros par an
ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561
IF:
1.7
5-Year IF:
1.4
Immediacy Index:
0.6
Eigenfactor:
0.00072
JCI:
0.43
SJR:
0.318
SNIP:
0.568
CiteScore™::
3.5
H-Index:
28
Indexed in
ANALYSIS OF HEAT TRANSFER IN A BILAYER METAL FOAM BLOCK SUBJECTED TO AN IMPINGING AIR JET
Volume 48,
Numéro 14, 2017,
pp. 1281-1298
DOI: 10.1615/HeatTransRes.2017017191
RÉSUMÉ
Combining a bilayer metal foam block and a confined slot air jet to enhance the heat transfer in the channel is presented in this paper. The height ratio h1/h2, the number of layers, porosity φ, and the material of the metal foam block, as well as the Reynolds number Re of the air jet have great impacts on the heat transfer in the metal foam block of the channel.
546 Vues d'articles
36 Téléchargements d'articles
Métrique
Articles avec un contenu similaire:
Dernier numéro
PREPARATION METHOD AND THERMAL PERFORMANCE OF A NEW ULTRA-THIN FLEXIBLE FLAT PLATE HEAT PIPE
ANALYZING THE HEAT AND FLOW CHARACTERISTICS IN SPRAY COOLING BY USING AN OPTIMIZED RECTANGULAR FINNED HEAT SINK
FLOW BOILING HEAT TRANSFER COEFFICIENT USED FOR THE DESIGN OF THE EVAPORATOR OF A REFRIGERATION MACHINE USING CO2 AS WORKING FLUID
EXPERIMENTAL STUDY ON TWO-PHASE NONLINEAR OSCILLATION BEHAVIOR OF MINIATURIZED GRAVITATIONAL HEAT PIPE
STUDY ON THE INFLUENCE OF MULTI-FREQUENCY NOISE ON THE COMBUSTION CHARACTERISTICS OF POOL FIRES IN SHIP ENGINE ROOMS
Prochains articles
Effective Efficiency Analysis of Artificially Roughed Solar Air Heater
Energy, Exergy-Emission Performance Investigation of Heat Exchanger with Turbulators Inserts and Ternary Hybrid Nanofluid
Temperature correction method of radiation thermometer based on the nonlinear model fitted from spectral emissivity measurements of Ni-based alloy
Analysis of Thermal Performance in a Two-phase Thermosyphon loop based on Flow Visualization and an Image Processing Technique
Investigation of the Effect of Dead State Temperature on the Performance of Boron Added Fuels and Different Fuels Used in an Internal Combustion Engine.
PREDICTION OF PARAMETERS OF BOILER SUPERHEATER BASED ON TRANSFER LEARNING METHOD
A temperature pre-rectifier with continuous heat storage and release for waste heat recovery from periodic flue gas
Study on the Influence of Multi-Frequency Noise on the Combustion Characteristics of Pool Fires in Ship Engine Rooms
Experimental study on two-phase nonlinear oscillation behavior of miniaturized gravitational heat pipe
Flow boiling heat transfer Coefficient used for the Design of the Evaporator of a Refrigeration Machine using CO2 as Working Fluid
Analyzing The Heat and Flow Characteristics In Spray Cooling By Using An Optimized Rectangular Finned Heat Sink
Thermal management of lithium-ion battery packs by using corrugated channels with nano-enhanced cooling
Convective heat transfer inside a rotating helical pipe filled with saturated porous media
Preparation method and thermal performance of a new ultra-thin flexible flat plate heat pipe
Influence of Temperature Gradients and Fluid Vibrations on the Thermocapillary Droplet Behavior in a Rotating Cylinder
The Effect of Corrugation on Heat Transfer and Pressure Drop in a Solar Air Heater: A Numerical Investigation
Investigation of the Effect of Using Different Nanofluids on the Performance of the Organic Rankine Cycle
Entropy generation and heat transfer performance of cylindrical tube heat exchanger with perforated conical rings: a numerical study
Molecular dynamics study of the thermal transport properties in the graphene/C3N multilayer in-plane heterostructures
Flow boiling critical heat flux in a small tube for FC-72
STUDY OF FORCED ACOUSTIC OSCILLATIONS INFLUENCE ON METHANE OXIDATION PROCESS IN OXYGEN-CONTAINING FLOW OF HYDROGEN COMBUSTION PRODUCTS
Examining the Synergistic Use of East-West Reflector and Coal Cinder in Trapezoidal Solar Pond through Energy Analysis