Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 0.404 Facteur d'impact sur 5 ans: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v41.i2.30
pages 137-153

Numerical Study of Buoyancy-Opposed Wall Jet Flow

A. Abdel-Fattah
Department of Mechanical Power Engineering, Faculty of Engineering Menoufiya University, Shebin El-Kom

RÉSUMÉ

This paper describes a numerical study of the flow and thermal fields for an opposed wall jet. The hot water is injected from a plane jet down one wall of a vertical passage of a rectangular cross section into cooled water which moves slowly upward. The flow is assumed to be two-dimensional, steady, incompressible, and turbulent. The finite volume scheme is used to solve the continuity equation, momentum equations, energy equation, and k−ε model equations. The flow characteristics were studied by varying the Richardson number (0.0 ≤ Ri ≤ 0.052) and the ratio of background velocity to jet velocity (0.05 ≤ R ≤ 0.15). The results showed that the buoyancy limited the downward penetration of the jet and its lateral spread when the Richardson number increased. The shear layer formed at the interface between the two flow streams, and it became more concentrated at higher values of the Richardson number. In this region, the intensity of the turbulence became stronger and the turbulent shear stress had a minimum value. When the velocity ratio increased, the penetration of jet decreases, its lateral spreading becomes less. Also the temperature difference decreases with the velocity ratio increase. The numerical results give a good agreement with the experiment data of [1].


Articles with similar content:

NUMERICAL INVESTIGATION OF FILM COOLING SUBJECT TO BULK FLOW PULSATIONS
Heat Transfer Research, Vol.50, 2019, issue 10
Mostafa A. H. Abdelmohimen
DEVELOPMENT OF JET IMPINGEMENT MODEL TO IMPROVE MARS FOR MIXING BEHAVIOR IN A DOWNCOMER
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2017, issue
Goon Cherl Park, Keo Hyoung Lee
MIXED-CONVECTIVE COOLING OF A VERTICAL HOT PLATE BY SEMI-CONFINED LOW-SPEED SLOT JET IMPINGEMENT
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2009, issue
Shahin Amiri, Kaveh Habibi, Mehdi Ashjaee
Shock Trains Characteristic of Supersonic air Ejector
Second Thermal and Fluids Engineering Conference, Vol.18, 2017, issue
Weixiong Chen, Kangkang Xue, Yingchun Wang, Gen Li, Daotong Chong, Junjie Yan
EFFECT OF JET PULSING ON FILM COOLING NEAR THE LEADING EDGE OF A MODEL AEROFOIL BY LES
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Subrata Sarkar, Harish Babu