Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
Heat Transfer Research
Facteur d'impact: 0.404 Facteur d'impact sur 5 ans: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimer: 1064-2285
ISSN En ligne: 2162-6561

Volumes:
Volume 51, 2020 Volume 50, 2019 Volume 49, 2018 Volume 48, 2017 Volume 47, 2016 Volume 46, 2015 Volume 45, 2014 Volume 44, 2013 Volume 43, 2012 Volume 42, 2011 Volume 41, 2010 Volume 40, 2009 Volume 39, 2008 Volume 38, 2007 Volume 37, 2006 Volume 36, 2005 Volume 35, 2004 Volume 34, 2003 Volume 33, 2002 Volume 32, 2001 Volume 31, 2000 Volume 30, 1999 Volume 29, 1998 Volume 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2015007515
pages 735-749

AN INVERSE HEAT CONDUCTION MODEL FOR DETERMINING THE CASTING/CHILL INTERFACIAL HEAT TRANSFER COEFFICIENT

Liqiang Zhang
College of Mechanical and Electrical Engineering, Central South University of Forestry and Technology, Changsha, 410004, Hunan, P. R. China; State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082
Luoxing Li
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha, 410082, Hunan, P. R. China

RÉSUMÉ

The interfacial heat transfer coefficient (IHTC) is required for accurate simulation of the casting process. However, it cannot be easily obtained simply by using either experimental or theoretical methods. Using measured temperature data, an inverse method can be used to predict the IHTC. However, the latent heat released during the solidification of a molten metal complicates the associated temperature and IHTC calculations. To overcome this difficulty, an equivalent specific heat method is applied in this study to calculate the IHTC for the casting process. It is found that the identified IHTC varies with time during castings solidification. The IHTC values calculated for an aluminum alloy casting of simple geometry cast on a steel chill vary from 1200 to 3500 W·m−2·K−1. Application of the indentified IHTC in the forward heat conduction model with the same boundary condition allows comparison between numerically calculated and experimentally obtained results for validation of the method. The results show that the numerically calculated temperatures are in good agreement with those measured experimentally. This confirms that the proposed method is a feasible and effective tool for determining the casting-mold IHTC. Additionally, the characteristics of the time−varying IHTC have also been discussed.


Articles with similar content:

ANNEALING OF SEMICONDUCTOR FILMS BY A MOVING LASER BEAM
Transport Phenomena in Thermal Engineering. Volume 2, Vol.0, 1993, issue
A.A. Rostami, Costas Grigoropoulos
ESTABLISHING APPLICATION LIMITS FOR CLASSICAL FOURIER AND WAVE HEAT CONDUCTION EQUATIONS FOR METALS ON THE BASIS OF ANALYTICAL SOLUTION AND CALCULATED TEMPERATURE DISTRIBUTION IN CASE OF GIANT HEAT PULSE
International Heat Transfer Conference 6, Vol.3, 1978, issue
R. Domanski
Experimental Determination of Heat Transfer and Friction Correlations for Plate Fin-and-Tube Heat Exchangers
Journal of Enhanced Heat Transfer, Vol.11, 2004, issue 3
Dawid Taler
PREDICTION OF THE SINTERING PROCESS FOR CERAMIC AND METAL POWDERS
International Heat Transfer Conference 8, Vol.6, 1986, issue
B. Dorri, F. W. Staub
Transient Cooling Analysis Of Semi-Crystalline Polymers
International Heat Transfer Conference 12, Vol.33, 2002, issue
Luca A. Tagliafico, Marco Cartesegna