Abonnement à la biblothèque: Guest
Portail numérique Bibliothèque numérique eBooks Revues Références et comptes rendus Collections
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.28 SNIP: 0.421 CiteScore™: 0.9

ISSN Imprimer: 2150-766X
ISSN En ligne: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2018020287
pages 347-357

FABRICATION AND CHARACTERIZATION OF AN AL/CR2O3/ETN ENERGETIC NANOCOMPOSITE VIA A SOL-GEL METHODOLOGY

Yi Wang
School of Materials Science and Engineering, North University of China, Taiyuan 030051, People's Republic of China
Xiaolan Song
School of Environment and Safety Engineering, North University of China, Taiyuan 030051, People's Republic of China
Dan Song
China Ordnance Institute of Science and Technology, Beijing, People’s Republic of China
Zhaoyang Song
School of Environment and Safety Engineering, North University of China, Taiyuan 030051, People's Republic of China

RÉSUMÉ

A nanocomposite with Al nanoparticles (~ 80 nm) embedded as the internal core and Cr2O3 and ETN nanoparticles (~ 10 nm) compactly coated on its surface was prepared via a sol-gel-freeze drying method. The effects of the initial concentration of CrCl3 (C0), solvent, and amount of propylene oxide (V3+PO/Cr) on the fabrication were discussed in detail, and the optimum technology was obtained. SEM, XPS, and IR analyses were employed to study the micron morphology, surface elements, and structure of the nanocomposite. Thermal analysis was also conducted with DSC-IR technology. The thermal decomposition gas products of the nanocomposite were detected and recorded as dynamic IR data as a function of the elapsed time. From the IR spectra collected at different times, the main gas product was determined to be NO2, which was simultaneously accompanied by CO2, CH2O, CH2, and CH fragments.


Articles with similar content:

EFFECT OF BALLISTIC MODIFIERS ON THE BURN RATE OF EXTRUDED COMPOSITE PROPELLANT FORMULATIONS BASED ON THERMOPLASTIC ELASTOMERIC BINDER
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 4
A. K. Mishra, R. N. Patkar, K. S. Mulage, Seema Dilip Kakade, Pawan Kumar Khanna, S. H. Kharat
MESOPOROUS Ni/NiO-SiO2 FOR EFFECTIVE HYDRODEOXYGENATION OF STEARIN INTO DIESEL RANGE HYDROCARBONS
Catalysis in Green Chemistry and Engineering, Vol.1, 2018, issue 2
Anil K. Sinha, Hari Singh
AUSTENITIC STEEL SURFACE ALLOYED WITH ZIRCONIUM USING COMPRESSION PLASMA FLOW
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.16, 2012, issue 4
Valiantsin M. Astashynski, Nikolai N. Cherenda, E. A. Kostyukevich, A. M. Kuzmitski, A. H. Sari, Vladimir V. Uglov, Yu. A. Petukhou
SYNTHESIS OF SURFACE LAYERS HARDENED BY METAL TRIALUMINIDE COMPOUND IN Al−Si ALLOY UNDER COMPRESSION PLASMA FLOWS IMPACT
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.18, 2014, issue 1-2
Valiantsin M. Astashynski, Nikolai N. Cherenda, N. V. Bibik, A. M. Kuzmitski, Vladimir V. Uglov
PLASMA CHEMICAL SYNTHESIS OF FINE MoSi2 AND MoSi2-Si3N4 COMPOSITE POWDERS
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.15, 2011, issue 4
J. Grabis, A. Orlov