Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Atomization and Sprays
Factor de Impacto: 1.737 Factor de Impacto de 5 años: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684

Volumes:
Volumen 30, 2020 Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017020387
pages 723-739

NUMERICAL STUDY OF SUBMERGED CAVITATING THROTTLE FLOWS

Bruno Beban
Technical University of Munich, Department of Mechanical Engineering, Chair of Aerodynamics and Fluid Mechanics, Germany
S. J. Schmidt
Chair of Aerodynamics and Fluid Mechanics, Department of Mechanical Engineering, Technical University of Munich, 85748 Garching bei München, Germany
N. A. Adams
Technical University of Munich, Department of Mechanical Engineering, Chair of Aerodynamics and Fluid Mechanics, Germany

SINOPSIS

We investigate by numerical simulation a highly unsteady cavitating flow of ISO 4113 test fuel in the valve chamber of a Diesel common rail injection system. Two-phase modeling is based on a single-fluid approach and a homogeneous mixture model. A fully compressible flow solver, taking into account the compressibility of liquid and liquid–vapor mixture, is employed. Computational results for two similar designs are presented. We discuss the cavity dynamics and reverse flow development in the discharge throttles for a pressure drop of approximately 2000 bar and choked flow conditions. The focus of this study is placed on inertia-driven effects and formation of collapse-induced pressure peaks, which allows us to apply an inviscid flow model. Our contribution assesses the erosion risk by monitoring maximum instantaneous wall pressures and employing a collapse detector algorithm for the identification of implosions of isolated vapor clouds. High-speed liquid jet discharging from the throttle, accompanied by supercavitation and reverse motion in the throttle, is predicted by the numerical simulation. Collapse pressures higher than 1 GPa are observed near material surfaces, resulting in high surface loads which can eventually lead to material erosion.


Articles with similar content:

PREDICTION MODEL AND VERIFICATION OF EXPLOSIVE IGNITION IN EXPLODING FOIL INITIATOR SYSTEM
Second Thermal and Fluids Engineering Conference, Vol.2, 2017, issue
Kyu-Hyoung Kim, Kyoungjin Kim, Seung-gyo Jang
A VISUALIZATION STUDY OF DUAL SPRAY INTERACTION OF A DUAL-ORIFICE FUEL INJECTOR AT LOW PRESSURE DROP
Journal of Flow Visualization and Image Processing, Vol.5, 1998, issue 1
Min Soo Yoon, Victor I. Yagodkin, Yeoung Min Han, Woo Seok Seol, Dae Sung Lee
FILLING PROCESS IN AN OPEN TANK
ICHMT DIGITAL LIBRARY ONLINE, Vol.1, 2000, issue
S. R. Sheu, Shong-Leih Lee
FILLING PROCESS IN AN OPEN TANK
ICHMT DIGITAL LIBRARY ONLINE, Vol.1, 2000, issue
S. R. Sheu, Shong-Leih Lee
Process Control System Information of Oil-Pipe Lines for Estimation of Reservoir's "Big Breathing"
Journal of Automation and Information Sciences, Vol.32, 2000, issue 1
Victor B. Yurochko, Vladimir M. Vasiliuk