Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Atomization and Sprays
Factor de Impacto: 1.737 Factor de Impacto de 5 años: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684

Volumes:
Volumen 30, 2020 Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.2017019779
pages 999-1023

NUMERICAL SIMULATION OF HIGH-PRESSURE FUEL SPRAY BY USING A NEW HYBRID BREAKUP MODEL

Wenliang Qi
College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China
Wenping Zhang
College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China
Pingjian Ming
College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China
Ming Jia
Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education, School of Energy and Power Engineering, Dalian University of Technology, Dalian, 116024, P.R. China
Ye Peng
College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, China

SINOPSIS

The aim of this research is to develop a new hybrid breakup model by considering the influence of turbulence inside the nozzle and modifying the second breakup model. The model distinguishes between primary breakup and secondary breakup. In modeling primary breakup, the turbulence perturbation was characterized by the turbulence characteristic length and time scales, and the weight coefficient was used when incorporating into the primary breakup model (KH). For secondary breakup, a competition between the Kelvin–Helmholtz (KH) and Rayleigh–Taylor (RT) breakup mechanisms was adopted. In addition to the two breakup mechanisms above, the Taylor analogy breakup (TAB) was also selected as a third competing mechanism in this process. The modified FVM (finite volume method) method was used to solve fluid-flow equations and numerical simulations were performed with the in-house software GTEA (General Transport Equation Analysis). Four breakup models including the TAB, cascade atomization and drop breakup (CAB), Kelvin–Helmholtz Rayleigh–Taylor (KH-RT) and the new hybrid breakup (hybrid) were implemented in GTEA software. In order to validate the new hybrid model, comparisons of the predictions from the present model with experimental data and predictions from the other three models were conducted. The results indicate that prediction from the new hybrid model gives better agreement with experimental measurements than those of the previous model.


Articles with similar content:

DEVELOPMENT OF LIQUID JET ATOMIZATION AND BREAKUP MODELS INCLUDING TURBULENCE EFFECTS
Atomization and Sprays, Vol.16, 2006, issue 8
H. P. Trinh, C. P. Chen
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE JET BREAKUP MODEL FORMULATION ON DIESEL ENGINE COMBUSTION COMPUTATIONS
Atomization and Sprays, Vol.8, 1998, issue 2
M. C. Cameretti, C. Bertoli, P. Belardini
MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL
Atomization and Sprays, Vol.9, 1999, issue 6
Rolf D. Reitz, Jennifer C. Beale
AXISYMMETRIC SIMULATIONS OF DROP DEFORMATION AND BREAKUP FOR VALIDATION OF A MODIFIED TAYLOR ANALOGY BREAKUP MODEL
Atomization and Sprays, Vol.27, 2017, issue 5
Franz X. Tanner, Kathleen A. Feigl, Chao Liang
LARGE EDDY SIMULATION OF SINGLE DROPLET AND LIQUID JET PRIMARY BREAKUP USING A COUPLED LEVEL SET/VOLUME OF FLUID METHOD
Atomization and Sprays, Vol.24, 2014, issue 4
James J. McGuirk, Feng Xiao, M. Dianat