Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Atomization and Sprays
Factor de Impacto: 1.737 Factor de Impacto de 5 años: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN Imprimir: 1044-5110
ISSN En Línea: 1936-2684

Volumes:
Volumen 30, 2020 Volumen 29, 2019 Volumen 28, 2018 Volumen 27, 2017 Volumen 26, 2016 Volumen 25, 2015 Volumen 24, 2014 Volumen 23, 2013 Volumen 22, 2012 Volumen 21, 2011 Volumen 20, 2010 Volumen 19, 2009 Volumen 18, 2008 Volumen 17, 2007 Volumen 16, 2006 Volumen 15, 2005 Volumen 14, 2004 Volumen 13, 2003 Volumen 12, 2002 Volumen 11, 2001 Volumen 10, 2000 Volumen 9, 1999 Volumen 8, 1998 Volumen 7, 1997 Volumen 6, 1996 Volumen 5, 1995 Volumen 4, 1994 Volumen 3, 1993 Volumen 2, 1992 Volumen 1, 1991

Atomization and Sprays

DOI: 10.1615/AtomizSpr.v6.i4.10
pages 377-408

DROP SIZE MEASUREMENTS IN HEAVY OIL SPRAYS FROM PRESSURE-SWIRL NOZZLES

Javier Ballester
University of Zaragoza, Fluid Mechanics Group/LITEC
Cesar Dopazo
CIEMAT, Av. Complutense 22 Madrid, 28040 Spain

SINOPSIS

The performance of pressure-swirl nozzles atomizing heavy oil is examined using laser diffractometry. Errors due to multiple scattering in dense sprays are avoided by the specific arrangement of the laser-diffraction particle size analyzer adopted in the present work. A parametric study of the influence of injection conditions and nozzle internal dimensions on mean drop size has been conducted, and empirical correlations are proposed. The results display significant differences with respect to previous studies, which are considered to be related to the small dimensions of the atomizers tested (orifice diameters down to 0.45 mm). The relevant role of viscous effects on the flow inside smalt-size nozzles is thought to be the factor responsible for their different behavior.


Articles with similar content:

DISCHARGE COEFFICIENT AND SPRAY ANGLE MEASUREMENTS FOR SMALL PRESSURE-SWIRL NOZZLES
Atomization and Sprays, Vol.4, 1994, issue 3
Cesar Dopazo, Javier Ballester
THE INFLUENCE OF DESIGN PARAMETERS ON THE INITIAL SPRAY CHARACTERISTICS OF THE HIGH-PRESSURE AIR INCLUSION NOZZLE
Atomization and Sprays, Vol.26, 2016, issue 4
Haijun Yan, Kazuhiro Nakano, Shintaroh Ohashi, Geng Bai, Tomomichi Mizukami, Somsak Kramchote
ENGINE COMBUSTION NETWORK (ECN): MEASUREMENTS OF NOZZLE GEOMETRY AND HYDRAULIC BEHAVIOR
Atomization and Sprays, Vol.22, 2012, issue 12
Tim Bazyn, Raul Payri, Alan L. Kastengren, Lyle M. Pickett, Julien Manin, Christopher F. Powell, F. Zak Tilocco
EFFECT OF NOZZLE CONFIGURATION ON THE ATOMIZATION OF A STEADY SPRAY
Atomization and Sprays, Vol.2, 1992, issue 4
Toshio Kurabayashi, Kazuhiro Abe, Siichi Shiga, Masaki Tanaka, Takao Karasawa
EFFERVESCENT ATOMIZATION AT INJECTION PRESSURES IN THE MPa RANGE
Atomization and Sprays, Vol.9, 1999, issue 6
Jay P. Gore, Robert A. Wade, W. A. Eckerle, Jennifer M. Weerts