Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Computational Thermal Sciences: An International Journal
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 0.7

ISSN Imprimir: 1940-2503
ISSN En Línea: 1940-2554

Computational Thermal Sciences: An International Journal

DOI: 10.1615/ComputThermalScien.2018024691
pages 17-28

PYROELECTRIC EFFECT CONTROL: DESIGN, FABRICATION, AND CHARACTERIZATION OF A MICROHEATERS ARRAY FOR BIOMEDICAL APPLICATIONS

S. Bhowmick
Shilps Sciences Private Limited, Bangalore, India
Orlando Leo
Department of Industrial Engineering, University of Naples Federico II, Napoli, Italy
Giuseppe Coppola
Institute for Microelectronics and Microsystems, CNR, Napoli, Italy
Mariano Gioffrè
Institute for Microelectronics and Microsystems, CNR, Napoli, Italy
Marilena Musto
Department of Industrial Engineering, University of Naples Federico II, Napoli, Italy
Giuseppe Rotondo
Department of Industrial Engineering, University of Naples Federico II, Napoli, Italy
Mario Iodice
Institute for Microelectronics and Microsystems, CNR, Napoli, Italy

SINOPSIS

An innovative microheater array design is realized on a lithium niobate crystal, to induce a uniform pyroelectric effect on an area of 12.5 × 12.5 mm2. Thermal analyses of the device were performed both experimentally and numerically using a FLIR thermocamera and COMSOLTM Multiphysics.A series of preliminary numerical simulations were carried out to obtain the optimized design of the aforementioned specifications. The microheaters were fabricated on the + Z surface of the lithium niobate crystal using a photolithography process followed by titanium thin-film deposition. We performed on this device a series of electrothermal characterizations; the results of the measurements showed good agreement with the numerical model in terms of heat distribution, accomplishing a comparison between the thermal maps coming from the two methodologies.


Articles with similar content:

Design, Fabrication and Characterization Of a µ-Heater Array for Control Pyroelectric effect
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2017, issue
Giuseppe Coppola, Mariano Gioffrè, Orlando Leo, Marilena Musto, Shomnath Bhowmick, Giuseppe Rotondo, Mario Iodice
FEASIBILITY OF THE ANGSTROM METHOD IN PERFORMING THE MEASUREMENT OF THERMAL CONDUCTIVITY IN VAPOR CHAMBERS
Heat Transfer Research, Vol.47, 2016, issue 7
Chen-I Chao, Wei-Keng Lin, Han-Chou Yao, Shao-Wen Chen
SPATIAL STRUCTURE OF A COMBUSTING SPRAY BY PIV
Turbulence and Shear Flow Phenomena -1 First International Symposium, Vol.0, 1999, issue
Tsuyoshi Nakajima, Yuji Ikeda, Naoki Yamada
SPATIAL STRUCTURE OF A COMBUSTING SPRAY BY PIV
TSFP DIGITAL LIBRARY ONLINE, Vol.1, 1999, issue
Tsuyoshi Nakajima, Yuji Ikeda, Naoki Yamada
DIRECT NUMERICAL SIMULATION OF HEAT CONDUCTION ACROSS METAL-METAL CONTACTS TO EXTRACT THERMAL CONTACT RESISTANCE (TCR)
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 2015, issue
Navni N. Verma , Sandip Mazumder