Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
International Journal for Multiscale Computational Engineering
Factor de Impacto: 1.016 Factor de Impacto de 5 años: 1.194 SJR: 0.554 SNIP: 0.68 CiteScore™: 1.18

ISSN Imprimir: 1543-1649
ISSN En Línea: 1940-4352

International Journal for Multiscale Computational Engineering

DOI: 10.1615/IntJMultCompEng.v7.i3.50
pages 217-225

A Micropillar Compression Simulation by a Multiscale Plastic Model Based on 3-D Discrete Dislocation Dynamics

Z. L. Liu
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
X. M. Liu
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
Zhuo Zhuang
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084
Yuan Gao
Applied Mechanics Laboratory, School of Aerospace, Tsinghua University, Beijing 100084 China
X. C. You
Failure Mechanics Laboratory, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China

SINOPSIS

In this article, a microcompression test for the Cu single-crystal micropillar containing an initial dislocation network is simulated by a multiscale computational model. This model combines a 3-D discrete dislocation dynamics (DDD) approach and a finite element method (FEM). The DDD code calculates the plastic strain induced by the slip of dislocation lines in a finite single crystal, which serves as a substitute for the constitutive relationship used in the conventional continuum mechanics. On the other hand, the displacement and stress field in crystal are calculated by FEM. In our simulations, the compression stress-strain curve ofthe micropillars can be divided into three distinct stages: a linear hardening stage, a normal plastic strain hardening stage, and a dislocation starvation hardening stage, accompanying a rather high stress level. The simulation results show that this atypical mechanical behavior is related with the effective "spiral dislocation sources" operation at the second stage and the dislocations escape from the free surfaces at the third stage. At last, the micropillar is almost dislocation-free, as observed in recent experiments.


Articles with similar content:

APPLICATION OF THE MULTISCALE FEM TO THE MODELING OF NONLINEAR COMPOSITES WITH A RANDOM MICROSTRUCTURE
International Journal for Multiscale Computational Engineering, Vol.10, 2012, issue 3
Klaus Hackl, Sandra Klinge
VIRTUAL METALLIC FOAMS. APPLICATION FOR DYNAMIC CRUSHING ANALYSIS
International Journal for Multiscale Computational Engineering, Vol.15, 2017, issue 5
Marcin Nowak, Zdzisław Nowak, Ryszard B. Pecherski
A MULTISCALE COMPUTATIONAL METHOD FOR 2D ELASTOPLASTIC DYNAMIC ANALYSIS OF HETEROGENEOUS MATERIALS
International Journal for Multiscale Computational Engineering, Vol.12, 2014, issue 2
Hongwu Zhang, Hui Liu
Reduction and optimisation of thermal models using Kirchhoff network theory, implementation to the thermal model of an induction machine
International Heat Transfer Conference 12, Vol.46, 2002, issue
Yves Bertin, Patrick Lagonotte, Marc Broussely
ERROR CONTROLLED USE OF THE TAYLOR ASSUMPTION IN ADAPTIVE HIERARCHICAL MODELING OF DSS
International Journal for Multiscale Computational Engineering, Vol.13, 2015, issue 2
Robert Lillbacka, Kenneth Runesson, Fredrik Larsson