High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes
Publicado 4 números por año
ISSN Imprimir: 1093-3611
ISSN En Línea: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
THEORETICAL CONSIDERATION OF AN OSCILLATING ARC PRESSURE DISTRIBUTION
Volumen 10,
Edición 4, 2006,
pp. 537-548
DOI: 10.1615/HighTempMatProc.v10.i4.50
SINOPSIS
Transferred arcs are widely used to melt metal. High pressure of the arc root at the metal surface often causes the blowing off the metal from the molten pool. This study theoretically assesses the pressure distribution on the anode surface when the arc is scanned using an external alternating magnetic field. By imposing a magnetic field, the time-averaged pressure of the arc on the anode decreases with increased magnetic flux density. In a magnetic field with a triangular waveform, the pressure distribution is not constant along the oscillating motion. Variation of the time-averaged pressure decreases with increased distance from the center.
308 Vistas de artículos
6 Descargas de artículos
Métrica
Artículos con contenido similar:
Último edicion
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
Próximos Artículos
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products