Publicado 8 números por año
ISSN Imprimir: 1065-5131
ISSN En Línea: 1563-5074
Indexed in
Effects of Exterior Surface Dimples on Heat Transfer and Friction Factors for a Cross-Flow Heat Exchanger
SINOPSIS
Experimental results which show the effects of adding spherical-indentation dimples to the exterior surfaces of tubes in a cross-flow heat exchanger are presented. This exchanger contains four streamwise rows of tubes which are staggered with respect to each other. Either shallow or deep dimples are located on the exterior tube surfaces. The tubes are surrounded by air and hot water is used inside the tubes. Air-side Reynolds numbers range from 10,500 to 12,800, and water-side Reynolds numbers range from 3460 to 6300. The deep dimples produce significant heat transfer augmentations (compared to tubes with smooth exterior surfaces) for tubes located in the tube row, which is farthest upstream. The shallow dimples produce significant heat transfer augmentations on the tubes, which are located in the first, third, and fourth rows of the tube bundle. This is due to thermal augmentations produced by the vortices which are shed from individual dimples. In some cases, these augmentations are enhanced by the relatively high advection speeds and absence of wake-mixing for the tube row which is located farthest upstream.
-
Mavridou S., Mavropoulos G.C., Bouris D., Hountalas D.T., Bergeles G., Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements, Applied Thermal Engineering, 30, 8-9, 2010. Crossref
-
Ishay Liel, Aharon Yosef, Ziskind G., Heat Transfer in Cross Flow of Gas over a Smooth and Modified Tube, 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 2014. Crossref
-
Hoseinzadeh S., Sahebi S. A. R., Ghasemiasl R., Majidian A. R., Experimental analysis to improving thermosyphon (TPCT) thermal efficiency using nanoparticles/based fluids (water), The European Physical Journal Plus, 132, 5, 2017. Crossref
-
Matt Carlos Frederico, Cruz Manuel Ernani, Heat Conduction in Two-Phase Composite Materials with Three-Dimensional Microstructures and Interfacial Thermal Resistance, in Heat Transfer in Multi-Phase Materials, 2, 2010. Crossref
-
Dedeyne Jens N., Van Cauwenberge David J., Reyniers Pieter A., Van Geem Kevin M., Marin Guy B., Large eddy simulation of tubular reactors with spherical dimples, Chemical Engineering Journal, 380, 2020. Crossref
-
Javid Khurram, Ali Nasir, Bilal Muhammad, A numerical simulation of the creeping flow of $$ {\text{TiO}}_{2} {\text{-SiO}}_{2} /{\text{C}}_{2} {\text{H}}_{6} {\text{O}}_{2} $$ hybrid-nano-fluid through a curved configuration due to metachronal waves propulsion of beating cilia, The European Physical Journal Plus, 135, 1, 2020. Crossref
-
Alghamdi Wajdi, Alsubie Abdelaziz, Kumam Poom, Saeed Anwar, Gul Taza, MHD hybrid nanofluid flow comprising the medication through a blood artery, Scientific Reports, 11, 1, 2021. Crossref