Heat Pipe Science and Technology, An International Journal
Publicado 4 números por año
ISSN Imprimir: 2151-7975
ISSN En Línea: 2151-7991
CONDITIONS OF WORKING ABILITY OF PULSATING PUMP OF HEAT ACTION
Volumen 5,
Edición 1-4, 2014,
pp. 193-198
DOI: 10.1615/HeatPipeScieTech.v5.i1-4.190
SINOPSIS
The paper describes the critical conditions for the functioning of the pump of heat action (PHA). They are determined by the heat flux in the evaporator that provides the equilibrium working condition of the pump at a given vapor pressure. This pressure depends on the hydraulic characteristics of the pump and the external contour and the boundary conditions in the zones of evaporation and condensation. Another condition is due to the cooling rate of the drained condenser-accumulator, which must be enough to exclude the possibility of a limit overheating temperature achievement in drained evaporator.
600 Vistas de artículos
2 Descargas de artículos
Métrica
Artículos con contenido similar:
Último edicion
PREFACE: SELECTED PAPERS FROM THE JOINT 18TH INTERNATIONAL HEAT PIPE CONFERENCE AND THE 12TH INTERNATIONAL HEAT PIPE SYMPOSIUM
FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS OF A JEST-TYPE LOOP THERMOSYPHON
EFFECT OF CONDENSER TEMPERATURE ON THE START-UP OF A PULSATING HEAT PIPE
DESIGN, MANUFACTURING, AND CHARACTERIZATION OF COPPER CAPILLARY STRUCTURES FOR LOOP HEAT PIPES
INNOVATIVE THERMAL DESIGN SATELLITE WITH NETWORKED VARIABLE-CONDUCTANCE OSCILLATING HEAT PIPES
THERMAL MANAGEMENT USING COPPER-METHANOL HEAT PIPES FOR RADIO TRANSMITTER SYSTEMS
EXPERIMENTAL STUDY OF THE PERFORMANCE OF WATER–COPPER SCREEN MESH WICK HEAT PIPES OPERATING IN POWER CYCLES