Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 0.404 Factor de Impacto de 5 años: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018016611
Forthcoming Article

Experimental Study of Pool Boiling Heat Transfer on Micro-Pin-Finned Surface With Mechanical Oscillation

Jinjia Wei
State Key Lab of multiphase Flow, Xi'an Jiaotong Univerisity
Xin Kong
State Key Lab of multiphase Flow, Xi'an Jiaotong Univerisity
Jie Ding
State Key Lab of multiphase Flow, Xi'an Jiaotong Univerisity
Yonghai Zhang
State Key Lab of multiphase Flow, Xi'an Jiaotong Univerisity


To further enhance pool boiling heat transfer , an new oscillation device was proposed. An oscillating plate was located over the heater surface with a vertical oscillation amplitude of 20mm and frequency of 6 HZ. Three N-type phosphorus-doped silicon chips were used as heater surfaces. One was smooth surface, and the other two were micro-pin-finned chips having fin thickness of 30 μm and fin height of 60 μm (chip PF30-60). The pin-fin arrays were fabricated with aligned and staggered arrangements respectively. Absolute ethyl alcohol was used as working fluid. The results showed that mechanical oscillation can enhance boiling heat transfer in both convective region and high flux region. The wall superheat showed a considerable decrease of 20-30 ℃ in the convective region by thinning the thermal boundary layer on heater surface, and the critical heat flux could also be increased by 20%. In addition, micro-pin-finned chips showed better performance due to much more fresh liquid supply from the interconnected tunnels formed by micro-pin-fins, which is driven by capillary force.