Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 0.404 Factor de Impacto de 5 años: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumes:
Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.v32.i1-3.100
6 pages

Experimental Investigation of Heat Transfer in a Cylindrical Tube Heated on One Side by Highly Dense Energy Beams

Aleksey V. Dedov
National Research University "Moscow Power Engineering Institute", Russia, 111250 Moscow, Krasnokazarmennaya str., 14
Alexander N. Varava
National Research University "Moscow Power Engineering Institute", Russia, 111250 Moscow, Krasnokazarmennaya str., 14
Alexander T. Komov
National Research University "Moscow Power Engineering Institute", Russia, 111250 Moscow, Krasnokazarmennaya str., 14
V. K. Naumov
Russian Scientific Center "The Kurchatov Institute" Instituteof Nuclear Synthesis Moscow, Russia
S. A. Shcheglov
Moscow Power Engineering Institute (Technical University), Moscow, Russia

SINOPSIS

We present the results of experimental investigations of heat exchanging in a cylindrical tube heated on one side by beams of charged particles (electrons) with a high density of thermal energy. Heat removal is made by a water stream, twisted by a screw insert, having the mass velocities in the range ρw = 1870−8900 kg/(m2·sec). The experiments were carried out on a fragment of the tube in the receiver of the beams of deviated ions in the system of injection of a T-15 tokamak. The bank of experimental data includes 510 points. It is shown that under the conditions of heat removal by the twisted flow with the coefficient of twisting k = 0.897 and subcooling ~170°C the density of the flux removed can attain ~100 MV/m2 in the case of long-pulse heating. It is noted that with the number of cycles of about 70 the fatigue destruction of the surface occurs.


Articles with similar content:

INFLUENCE OF TURBULENCE INTENSITY ON HEAT TRANSFER AND PRESSURE DROP IN COMPACT HEAT EXCHANGERS
International Heat Transfer Conference 8, Vol.6, 1986, issue
D. Traub, Karl Stephan
HEAT TRANSFER AND PRESSURE DROP IN HEAT EXCHANGERS WITH A SINGLE ROW AT HIGH TURBULENCE INTENSITY
International Heat Transfer Conference 9, Vol.5, 1990, issue
Karl Stephan, M. Beziel
Optimizing Mass Transfer during Multipass Zone Refining
ICHMT DIGITAL LIBRARY ONLINE, Vol.0, 1979, issue
Robert Schmid
Augmentation of Forced Convection Condensation Heat Transfer Inside a Horizontal Tube Using Spiral Spring Inserts
Journal of Enhanced Heat Transfer, Vol.12, 2005, issue 4
M. A. Akhavan-Behabadi, Ravi Kumar, K. N. Agrawal, M. R. Salimpoor
Correlation Between Solar Wind Energy and Non-Tidal Variations of Earth Rotation Velocity
Telecommunications and Radio Engineering, Vol.53, 1999, issue 9-10
I. G. Zakharov