Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 1.199 Factor de Impacto de 5 años: 1.155 SJR: 0.267 SNIP: 0.503 CiteScore™: 1.4

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumes:
Volumen 51, 2020 Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018019257
pages 597-616

THERMAL ANALYSIS OF RECTANGULAR FINS WITH DIFFERENT SHAPES OF LATERAL PERFORATIONS BY FORCED CONVECTION

Kavita H. Dhanawade
Lokmanya Tilak College of Engineering, Department of Mechanical Engineering, Navi Mumbai, University of Mumbai, India
Vivek K. Sunnapwar
Lokmanya Tilak College of Engineering, Department of Mechanical Engineering, Navi Mumbai, University of Mumbai, India
Hanamant S. Dhanawade
Smt. Indira Gandhi College of Engineering, Department of Mechanical Engineering, Navi Mumbai, University of Mumbai, India

SINOPSIS

Heat dissipation is an important problem for compactness and weight of equipment. Heat dissipaters are chosen not only for their thermal performance but also for other design parameters such as weight, cost, and reliability depending on applications. The present paper reports on thermal analysis of rectangular fin arrays with different shapes of perforations for forced convection. The cross-sectional area of a rectangular duct was 200 mm × 80 mm. The data used for the performance analysis were obtained experimentally for aluminum at 200-W heat input with the Reynolds number varying in the range 2.1 × 104–8.7 × 104. The simulation was carried out using the ANSYS 12.0 and fluid flow (CFX) workbench. The CFD simulation results are validated with experimental results and good agreement was observed. The results show that fins with circular and hexagonal perforations have remarkable heat transfer enhancement in addition to reduction in weight by comparison with solid fins, which amounts to almost 18%.


Articles with similar content:

HEAT TRANSFER AND FLUID FLOW STUDY OF CuO-W/EG(50:50) NANOFLUIDS THROUGH ALUMINIUM MICROCHANNELS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Dasaroju Gangacharyulu, Harkirat Sandhu
EXPERIMENTAL INVESTIGATIONS ON THE COOLING PERFORMANCE OF MICROCHANNELS USING ALUMINA NANOFLUIDS WITH DIFFERENT BASE FLUIDS
Journal of Enhanced Heat Transfer, Vol.25, 2018, issue 3
Dasaroju Gangacharyulu, Harkirat Sandhu, Mani Kanwar Singh
EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT IN A PLATE FIN HEAT EXCHANGER USING RECTANGULAR TYPE WINGLETS
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Vol.0, 2017, issue
Ganesh Bhoge, Sunil B. Ingole
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF PRESSURE DROP IN SILICON CARBIDE (SIC) FUEL ROD FOR PRESSURIZED WATER REACTOR
Second Thermal and Fluids Engineering Conference, Vol.24, 2017, issue
Ahmed M. Abir, Titan C. Paul, Jamil A. Khan, Leo A. Carrilho
Effect of Streamlined Fins on the Heat Transfer and Pressure Drop Characteristics in Printed Circuit Heat Exchangers for Super Critical Carbon dioxide Cycle
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Vol.0, 2019, issue
Jeevan Devagiri, T.R. Seetharam , V. Krishna, Kamal Raj K, Rajendra Prasad KS, Ganesh Pratheek KM