Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
Heat Transfer Research
Factor de Impacto: 1.199 Factor de Impacto de 5 años: 1.155 SJR: 0.267 SNIP: 0.503 CiteScore™: 1.4

ISSN Imprimir: 1064-2285
ISSN En Línea: 2162-6561

Volumes:
Volumen 51, 2020 Volumen 50, 2019 Volumen 49, 2018 Volumen 48, 2017 Volumen 47, 2016 Volumen 46, 2015 Volumen 45, 2014 Volumen 44, 2013 Volumen 43, 2012 Volumen 42, 2011 Volumen 41, 2010 Volumen 40, 2009 Volumen 39, 2008 Volumen 38, 2007 Volumen 37, 2006 Volumen 36, 2005 Volumen 35, 2004 Volumen 34, 2003 Volumen 33, 2002 Volumen 32, 2001 Volumen 31, 2000 Volumen 30, 1999 Volumen 29, 1998 Volumen 28, 1997

Heat Transfer Research

DOI: 10.1615/HeatTransRes.2018025129
pages 349-360

A NOVEL LIQUID-PACKAGING TECHNOLOGY FOR HIGHLY RELIABLE UV-LED ENCAPSULATION

Wen-Hua Zhang
Department of Engineering and System Science, National Tsing-Hua University, Hsinchu City, Taiwan
Wei-Keng Lin
Department of Engineering and System Science, National Tsing-Hua University, Hsinchu City, Taiwan
Chih-Ting Yeh
Department of Mechanical Engineering, National Chiao Tung University, Hsinchu City, Taiwan
Song-Bor Chiang
Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu City, Taiwan
Chih-Sheng Jao
Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu City, Taiwan

SINOPSIS

This paper proposes a liquid-packaging technology for UV LED. Unlike the traditional packaging methods that involve thermosett ing silicon or quartz glass, the proposed method primarily uses silicon oil to directly contact the chip, which prevents erosion due to moisture or oxygen. In this study, UV LEDs with high heat dissipation technology were selected, and the experimental results of optical and thermal management were compared between the general packaging and liquid-packaging structures, respectively. The results of the optical experiments showed that the proposed method increases the extraction effi ciency by 9.5%. The results of the heat dissipation experiments showed that the liquid-packaging technology can reduce the thermal resistance of the UV-LED package by 31%.


Articles with similar content:

COOLING OF ELECTRONIC CHIPS IN LIQUID NITROGEN
International Heat Transfer Conference 9, Vol.2, 1990, issue
T. J. Crowley , Kemal Tuzla, A. F. Cokmez-Tuzla, John C. Chen
NUCLEATE BOILING HEAT TRANSFER PERFORMANCE OF LASER TEXTURED COPPER SURFACES
Journal of Enhanced Heat Transfer, Vol.26, 2019, issue 6
Vishal V. Nirgude, Santosh K. Sahu
EXPERIMENTAL STUDY ON NATURAL CONVECTION COOLING OF LED USING A FLAT-PLATE PULSATING HEAT PIPE
Heat Transfer Research, Vol.44, 2013, issue 1
Zhi Li , Li Jia
Characterization of Valveless Piezoelectrically-Actuated Micropumps with Novel Diffuser Elements
International Heat Transfer Conference 15, Vol.49, 2014, issue
Jason Stafford, Leicester Ehrlich, Nicholas Jeffers, J. Punch
MODELING AND EXPERIMENTAL ANALYSIS OF HEAT TRANSFER FOR POWER ELECTRONIC MODULE INTEGRATED WITH PHASE CHANGE THERMAL MANAGEMENT SYSTEM
International Heat Transfer Conference 16, Vol.10, 2018, issue
Yangang Wang, Yiyi Chen, Yuying Yan, Bo Li