Suscripción a Biblioteca: Guest
Portal Digitalde Biblioteca Digital eLibros Revistas Referencias y Libros de Ponencias Colecciones
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.142 SNIP: 0.16 CiteScore™: 0.29

ISSN Imprimir: 2150-766X
ISSN En Línea: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2013005737
pages 307-317

PLATE DENT TESTS AND SEDIMENTATION OF PARTICLES IN MELT-CAST EXPLOSIVES

Patrick Brousseau
Defence Research and Development Canada − Valcartier, 2459 Pie-XI Blvd North, Quebec, Canada G35 ix5
Serge Trudel
Defence Research and Development Canada − Valcartier, 2459 Pie-XI Blvd North, Quebec, Canada G35 ix5
Pascal Beland
Defence Research and Development Canada − Valcartier, 2459 Pie-XI Blvd North, Quebec, Canada G35 ix5

SINOPSIS

A short experimental study demonstrated that the plate dent test is very sensitive to the last few centimeters of explosives at the bottom of the cylinders. The tests were performed by simply detonating an explosive cylinder with a small thickness (12.7−25.4 mm) of a different explosive (faster, slower, inert) at the bottom. The study will present how those small thicknesses influence the dent depth and hence the reported performance. Cylinders of explosives were cast and then cut to determine the extent of sedimentation of the HMX particles. Densities were taken at various places and concentrations of HMX were extrapolated from those. It was found that there was a difference of 22% in the percentage of HMX from the bottom and the top of the cylinder (66% vs. 44%; theoretical average was 52.8%). The explosive at the bottom was then significantly different and more powerful than the one at the top. The study will also demonstrate how the situation can be worse in real artillery shells. Given the results of the plate dent experiments reported before, it will be demonstrated how in theory one could be misled on the plate dent test by letting particles settle. Simple precautions can be taken to eliminate this variable and to ensure that the results of the plate dent test are meaningful. It also serves as a reminder that the composite explosives that we test, especially the melt-cast explosives, have large variations in their composition from sample to sample.


Articles with similar content:

ANALYSIS OF CONDUCTION RESPONSES DURING AN UNDERGROUND COAL GASIFICATION EXPERIMENT
International Heat Transfer Conference 6, Vol.2, 1978, issue
Paul J. Hommert
MEASURING TECHNIQUES FOR DETERMINING THE THERMAL DIFFUSIVITY OF LOW-CONDUCTIVITY MATERIALS WITH A CONVENTIONAL TWIN-PLATE DEVICE
International Heat Transfer Conference 7, Vol.10, 1982, issue
Bu-Xuan Wang, Zhaohong Fang
ASSESSMENT OF X-RAY MICRO-CT MEASUREMENTS OF POROSITY AND SOLUTE CONCENTRATION DISTRIBUTIONS DURING DIFFUSION IN POROUS GEOLOGIC MEDIA
Journal of Porous Media, Vol.16, 2013, issue 8
Tom A. Al, Esam M. A. Hussein, H. M. D. Agbogun
RADIATION HEAT TRANSFER CALCULATIONS IN ENCLOSURES LIKE FURNACES AND COMBUSTION CHAMBERS
International Heat Transfer Conference 7, Vol.5, 1982, issue
E. Scholand
PATTERNS OF BIFURCATING CONVECTIVE FLOWS IN LONG HORIZONTAL CAVITIES
ICHMT DIGITAL LIBRARY ONLINE, Vol.3, 1997, issue
Alexander Gelfgat, Pinhas Z. Bar-Yoseph, Alexander L. Yarin