Abo Bibliothek: Guest
Proceedings of CHT-08 ICHMT International Symposium on Advances in Computational Heat Transfer
May, 11-16, 2008, Marrakesh, Morocco

DOI: 10.1615/ICHMT.2008.CHT


ISBN Print: 978-1-56700-253-9

ISSN: 2578-5486

AIRFLOW AND HEAT TRANSFER IN A SLOT-VENTILATED ENCLOSURE APPLICATION TO REFRIGERATED TRUCKS

page 9
DOI: 10.1615/ICHMT.2008.CHT.320
Get accessGet access

ABSTRAKT

Slot-ventilated enclosures are extensively used in many engineering applications such as buildings, animal houses and equipment for food transport and storage. The level and the uniformity of parameters such as temperature and humidity are highly governed by airflow patterns and in most of the applications different obstacles also interact with the airflow. The study concerns a slot ventilated long enclosure (L/H=5.3, W/H=1) loaded with porous boxes. This configuration corresponds to a refrigerated truck loaded with crates containing fruit or vegetables. The rectangular inlet section (hi /H=0.056, wi /W=0.4) is near the ceiling and the outlet is located near the floor on the same face. The inlet wall jet is turbulent (Re=1.9·105). An isothermal case and a non-isothermal case (including heat generation in the boxes and heat losses through the walls) were simulated and compared. The Reynolds Averaged Navier-Stokes equations were solved using an RSM turbulence closure model. Darcy-Forchheimer terms were added in the porous medium zone. The Boussinesq approximation was used to take account of mixed convection. The governing equations were solved using the finite volume method. In the isothermal case, the velocity is very low at the rear part of the enclosure. In the non-isothermal case, a secondary recirculation zone appears in the rear part of the enclosure due to free convection and therefore the velocity magnitude is higher. But in the front part, the airflow pattern which reflects the wall jet expansion is very similar because the flow is governed by forced convection. A different inlet configuration, in which the airflow is blown in at three positions along the enclosure, was also investigated. In this case, the ventilation and temperature levels within boxes were found to be more homogeneous.

Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen Preise und Aborichtlinien Begell House Kontakt Language English 中文 Русский Português German French Spain