Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
International Journal of Fluid Mechanics Research
ESCI SJR: 0.206 SNIP: 0.446 CiteScore™: 0.9

ISSN Druckformat: 2152-5102
ISSN Online: 2152-5110

Volumes:
Volumen 47, 2020 Volumen 46, 2019 Volumen 45, 2018 Volumen 44, 2017 Volumen 43, 2016 Volumen 42, 2015 Volumen 41, 2014 Volumen 40, 2013 Volumen 39, 2012 Volumen 38, 2011 Volumen 37, 2010 Volumen 36, 2009 Volumen 35, 2008 Volumen 34, 2007 Volumen 33, 2006 Volumen 32, 2005 Volumen 31, 2004 Volumen 30, 2003 Volumen 29, 2002 Volumen 28, 2001 Volumen 27, 2000 Volumen 26, 1999 Volumen 25, 1998 Volumen 24, 1997 Volumen 23, 1996 Volumen 22, 1995

International Journal of Fluid Mechanics Research

DOI: 10.1615/InterJFluidMechRes.v24.i4-6.180
pages 623-632

Metal Solidification during Spray Forming

Udo Fritsching
Department of Particles and Process Engineering, University of Bremen; Foundation Institute of Materials Science, Badgasteiner Str. 3, D-28359 Bremen, Germany
D. Bergmann
Chemical Engineering Department, University Bremen, Germany
Klaus Bauckhage
Chemical Engineering Department, University of Bremen, Bremen, Germany

ABSTRAKT

An essential feature of the spray forming process for the production of near net shaped metal products is a suitable composition of the spray cone prior to impingement onto the substrate or deposit. Excellent product qualities and homogeneities need a mixture of particles in different stages of their individual solidification. Modeling of phase change behavior of metal melts is an important part of an overall thermal modeling of the process. Control of the solidification process is one of the key issues in spray forming research. The thermal history of a metal element from superheating (in advance of the atomization process) via solidification and cooling to room temperature has significant influence on the resulting material properties of the product. Dependent on the alloy composition, individual solidification models must be derived. This contribution describes the droplet solidification in flight in the spray cone and further on in the resulting deposit during spray forming for a steel alloy. For the simulation of the spray cone behavior, a multiphase flow model is established including momentum and thermal coupling. The description of the transient thermal conditions in the sprayed deposit, including necessary boundary conditions, is derived in a general coordinate based heat conduction algorithm.


Articles with similar content:

NUMERICAL INVESTIGATION OF MICROPORE FORMATION DURING SUBSTRATE IMPACT OF MOLTEN DROPLETS IN PLASMA SPRAY PROCESSES
Atomization and Sprays, Vol.4, 1994, issue 4
Roger H. Rangel, Enrique J. Lavernia, Huimin Liu
1-D MODELING OF COATING FORMATION UNDER PLASMA SPRAYING CONDITIONS: SPLAT COOLING AND LAYERING
Progress in Plasma Processing of Materials, 2001, Vol.0, 2001, issue
Mohammed El Ganaoui, Guy Delluc, Bernard Pateyron, Pierre Fauchais, Armelle Vardelle
RAPID SOLIDIFICATION STUDY OF STABILIZED ZIRCONIA UNDER PLASMA SPRAYING
High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, Vol.10, 2006, issue 2
Habib Sammouda, S. Ben Naoua, Pierre Fauchais
TRANSIENT FEM SIMULATION OF 316L STAINLESS STEEL FABRICATED BY SELECTIVE LASER MELTING WITH DIFFERENT PROCESSING PARAMETERS.
4th Thermal and Fluids Engineering Conference, Vol.14, 2019, issue
Guoqiang Li, Stephen Akwaboa, Patrick Mensah, Emmanuel Duodu Amoako, Samuel Ibekwe
THERMOPHYSICAL PHENOMENA IN METAL ADDITIVE MANUFACTURING BY SELECTIVE LASER MELTING: FUNDAMENTALS, MODELING, SIMULATION, AND EXPERIMENTATION
Annual Review of Heat Transfer, Vol.20, 2017, issue 1
Ryan W. Penny, A. John Hart, Yu Zou, Jonathan S. Gibbs, Christoph Meier