Erscheint 12 Ausgaben pro Jahr
ISSN Druckformat: 1091-028X
ISSN Online: 1934-0508
Indexed in
A METHOD FOR EXTRACTING 3D FRACTURE GEOMETRIES AND ACQUIRING THEIR MECHANICAL PROPERTIES FROM CT SCANNING IMAGES
ABSTRAKT
Fractures in rock masses subjected to considerable in situ stress may close, propagate, or coalescence with other weak planes. These responses determine the mechanical properties of the rock and can significantly influence the exploitation of oil and gas resources and the construction of subsurface civil engineering projects. In this paper, based on computed tomography (CT) scanning images, we proposed a method for extracting the three-dimensional (3D) geometries of fractures in rock samples and acquiring the initial fracture stiffness and maximum apertures. In this method, fractures in coal samples were extracted from CT scans by combining Sobel edge detection with a local threshold algorithm and were then reconstructed through superposition. To analyze the mechanical properties of these fractures, the reconstructed fractures were subsequently divided into several fragments simplified as two subparallel plates. The initial fracture stiffness was subjected to the distribution and magnitude of the initial contact areas of a fracture. For a single fracture, if the initial contact areas are larger and more dispersed, the initial fracture stiffness will increase. The permeability values calculated from the reconstructed 3D fractures are consistent with and have the same order of magnitude as those from laboratory experiments. Therefore, this method is effective and can be used to elucidate the entire process of fracture closure and to predict the permeability of rocks.
-
Baghbanan, A. and Jing, L., Stress Effects on Permeability in a Fractured Rock Mass with Correlated Fracture Length and Aperture, Int. J. RockMech. Min., vol. 45, no. 8, pp. 1320-1334, 2008.
-
Bandis, S.C., Lumsden, A.C., and Barton, N.R., Fundamentals of Rock Joint Deformation, Int. J. Rock Mech. Min. Sci. Geomech. Abstr., vol. 20, no. 6, pp. 249-268, 1983.
-
Cnudde, V. and Boone, M.N., High-Resolution X-Ray Computed Tomography in Geosciences: A Review of the Current Technology and Applications, Earth-Sci. Rev, vol. 123, no. 4, pp. 1-17,2013.
-
Dicker, A.I. and Smits, R.M., A Practical Approach for Determining Permeability from Laboratory Pressure-Pulse Decay Measurements, SPE. Int. M. Petrol. Eng., Tianjin, China, SPE Paper 17578, pp. 285-292, 1988.
-
Griffiths, L., Heap, M.J., Xu, T., Chen, C., and Baud, P., The Influence of Pore Geometry and Orientation on the Strength and Stiffness of Porous Rock, J. Struct. Geol., vol. 96, pp. 149-160, 2017.
-
Hopkins, D.L., The Implications of Joint Deformation in Analyzing the Properties and Behavior of Fractured Rock Masses, Underground Excavations, and Faults, Int. J. Rock Mech. Min., vol. 37, nos. 1-2, pp. 175-202, 2000.
-
Ji, Y. and Vafai, K., Analysis of Pore-Scale Fluid Migration in a Porous Medium-Application to Coal Rock Seam, Int. J. Numer. Method. H., vol. 27, no. 8, pp. 1706-1719, 2017.
-
Kachanov, M., Prioul, R., and Jocker, J., Incremental Linear-Elastic Response of Rocks Containing Multiple Rough Fractures: Similarities and Differences with Traction-Free Cracks, Geophysics, vol. 75, no. 1, pp. D1-D11, 2010.
-
Kaydani, H. and Mohebbi, A., Experimental and Numerical Study of the Onset of Transient Natural Convection in a Fractured Porous Medium, Transp. Porous Media, vol. 116, no. 2, pp. 1-17, 2016.
-
Lee, H.S. and Cho, T.F., Hydraulic Characteristics of Rough Fractures in Linear Flow under Normal and Shear Load, Rock Mech. Rock Eng., vol. 35, no. 4, pp. 299-318,2002.
-
Li, B., Liu, R., and Jiang, Y., Influences of Hydraulic Gradient, Surface Roughness, Intersecting Angle, and Scale Effect on Nonlinear Flow Behavior at Single Fracture Intersections, J. Hydrol., vol. 538, pp. 440-453,2016.
-
Li, Y., Chen, Y.F., and Zhou, C.B., Hydraulic Properties of Partially Saturated Rock Fractures Subjected to Mechanical Loading, Eng. Geol., vol. 179, no. 10, pp. 24-31,2014.
-
Liu, H.H., Rutqvist, J., and Berryman, J.G., On the Relationship between Stress and Elastic Strain for Porous and Fractured Rock, Int. J. RockMech. Min, vol. 46, no. 2, pp. 289-296,2009.
-
Liu, R., Jiang, Y., Li, B., and Wang, X., A Fractal Model for Characterizing Fluid Flow in Fractured Rock Masses based on Randomly Distributed Rock Fracture Networks, Comput. Geotech., vol. 65, pp. 45-55, 2015.
-
Liu, Z.B., Shao, J.F., Hu, D.W., and Xie, S.Y., Gas Permeability Evolution with Deformation and Cracking Process in a White Marble under Compression, Transp. Porous Media, vol. 111, no. 2, pp. 441-455, 2016.
-
Mahmud, A., Riss, J., and Gentier, S., Experimental and Modelled Mechanical Behaviour of a Rock Fracture under Normal Stress, RockMech. Rock Eng., vol. 41, no. 6, pp. 869-892,2008.
-
Malama, B. and Kulatilake, P.H.S.W., Models for Normal Fracture Deformation under Compressive Loading, Int. J. Rock Mech. Min, vol. 40, no. 6, pp. 893-901,2003.
-
Matsuki, K., Wang, E.Q., Sakaguchi, K., and Okumura, K., Time-Dependent Closure of a Fracture with Rough Surfaces under Constant Normal Stress, Int. J. RockMech. Min., vol. 38, no. 5, pp. 607-619,2001.
-
Min, K.B., Rutqvist, J., Tsang, C.F., and Jing, L., Stress-Dependent Permeability of Fractured Rock Masses: A Numerical Study, Int. J. RockMech. Min, vol. 41, no. 7, pp. 1191-1210, 2004.
-
Misra, A. and Marangos, O., Rock Joint Micromechanics: Relationship of Roughness to Closure and Wave Propagation, Int. J. Geomech, vol. 11, no. 6, pp. 431-439, 2010.
-
Nemoto, K., Watanabe, N., Hirano, N., and Tsuchiya, N., Direct Measurement of Contact Area and Stress Dependence of Anisotropic Flow through Rock Fracture with Heterogeneous Aperture Distribution, Earth Planet Sci. Lett., vol. 281, nos. 1-2, pp. 81-87, 2009.
-
Olsson, R. and Barton, N., An Improved Model for Hydromechanical Coupling during Shearing of Rock Joints, Int. J. Rock Mech. Min., vol. 38, no. 3, pp. 317-329,2001.
-
Petrovitch, C.L., Pyrak-Nolte, L.J., and Nolte, D.D., Combined Scaling of Fluid Flow and Seismic Stiffness in Single Fractures, Rock Mech. Rock Eng., vol. 47, no. 5, pp. 1613-1623, 2014.
-
Pyrak-Nolte, L.J. and Morris, J.P., Single Fractures under Normal Stress: The Relation between Fracture Specific Stiffness and Fluid Flow, Int. J. Rock Mech. Min, vol. 37, nos. 1-2, pp. 245-262, 2000.
-
Rutqvist, J. and Tsang, C.F., Analysis of Thermal-Hydrologic-Mechanical Behavior near an Emplacement Drift at Yucca Mountain, J. Contam. Hydorl., vol. 62, no. 1, pp. 637-652, 2003.
-
Rutqvist, J., Freifeld, B., Min, K.B., Elsworth, D., and Tsang, Y., Analysis of Thermally Induced Changes in Fractured Rock Permeability during 8 Years of Heating and Cooling at the Yucca Mountain Drift Scale Test, Int. J. Rock Mech. Min., vol. 45, no. 8, pp. 1373-1389,2008.
-
Sevostianov, I. and Kachanov, M., Normal and Tangential Compliances of Interface of Rough Surfaces with Contacts of Elliptic Shape, Int. J. Solids Struct., vol. 45, no. 9, pp. 2723-2736,2008.
-
Soulaine, C., Gjetvaj, F., Garing, C., Roman, S., Russian, A., Gouze, P., and Tchelepi, H.A., The Impact of Sub-Resolution Porosity of X-Ray Microtomography Images on the Permeability, Transp. Porous Media, vol. 113, no. 1, pp. 1-17, 2016.
-
Swan, G., Determination of Stiffness and Other Joint Properties from Roughness Measurements, Rock Mech. Rock Eng., vol. 16, no. 1,pp. 19-38, 1983.
-
Taud, H., Martinez-Angeles, R., Parrot, J.F., and Hernandez-Escobedo, L., Porosity Estimation Method by X-Ray Computed Tomography, J. Petrol. Sci. Eng., vol. 47, no. 3, pp. 209-217, 2005.
-
Wang, L., Cardenas, M.B., Slottke, D.T., Ketcham, R.A., and Sharp, J.M., Modification of the Local Cubic Law of Fracture Flow for Weak Inertia, Tortuosity, and Roughness, Water Resour. Res., vol. 51, no. 4, pp. 2064-2080, 2015.
-
Zendehboudi, S., Rezaei, N., and Chatzis, I., Effects of Fracture Properties on the Behavior of Free-Fall and Controlled Gravity Drainage Processes, J. Porous Media, vol. 15, no. 4, pp. 343-369,2012.
-
Zhang, J., Standifird, W.B., Roegiers, J.C., and Zhang, Y., Stress-Dependent Fluid Flow and Permeability in Fractured Media: From Lab Experiments to Engineering Applications, Rock Mech. Rock Eng., vol. 40, no. 1, pp. 3-21, 2007.
-
Zhao, J. and Brown, E.T., Hydro-Thermo-Mechanical Properties of Joints in the Carnmenellis Granite, Q. J. Eng. Geol. Hydroge., vol. 25, no. 4, pp. 279-290, 1992.
-
Sun Shasha, Huang Saipeng, Gomez-Rivas Enrique, Griera Albert, Liu Bo, Xu Lulu, Wen Yaru, Dong Dazhong, Shi Zhensheng, Chang Yan, Xing Yin, Characterization of natural fractures in deep-marine shales: a case study of the Wufeng and Longmaxi shale in the Luzhou Block Sichuan Basin, China, Frontiers of Earth Science, 2022. Crossref