Heat Transfer Research
Erscheint 18 Ausgaben pro Jahr
ISSN Druckformat: 1064-2285
ISSN Online: 2162-6561
IF:
1.7
5-Year IF:
1.4
Immediacy Index:
0.6
Eigenfactor:
0.00072
JCI:
0.43
SJR:
0.318
SNIP:
0.568
CiteScore™::
3.5
H-Index:
28
Indexed in
Volumen 41, 2010 Ausgabe 4
DOI: 10.1615/HeatTransRes.v41.i4
Formation of Vortex Structures in a Vertical Enclosure with Finning of Its Both Walls
pp. 353-368
DOI: 10.1615/HeatTransRes.v41.i4.10
Heat Transfer in Boiling of a Moving Liquid in a Microchannel
pp. 369-387
DOI: 10.1615/HeatTransRes.v41.i4.20
Aerodynamics and Heat Transfer on Impingement of Twisted Impact Jets on Spherical Cavities
pp. 389-400
DOI: 10.1615/HeatTransRes.v41.i4.30
Reduction of Resistance and Heat Transfer Enhancement in Flow Past a Cylinder with Jet and Vortex Generators
pp. 401-411
DOI: 10.1615/HeatTransRes.v41.i4.40
Vortical Intensification of Heat Transfer in Microchannels with Oval Dimples
pp. 413-424
DOI: 10.1615/HeatTransRes.v41.i4.50
Experimental Verification of the Methods of Calculation of a Flow and Mixing of a Gaseous Fuel Behind a Swirling Frontal Module
pp. 425-444
DOI: 10.1615/HeatTransRes.v41.i4.60
Experimental Modeling of the Structure of a Reacting Twisted Flow Behind a Swirl Burner
pp. 445-463
DOI: 10.1615/HeatTransRes.v41.i4.70
Investigation of Nonstationary Heat Transfer in Boiling of Freon 113 on Dimpled Spherical and Cylindrical Surfaces under the Conditions of Free Convection
pp. 479-491
DOI: 10.1615/HeatTransRes.v41.i4.90
Neueste Ausgabe
PREPARATION METHOD AND THERMAL PERFORMANCE OF A NEW ULTRA-THIN FLEXIBLE FLAT PLATE HEAT PIPE
ANALYZING THE HEAT AND FLOW CHARACTERISTICS IN SPRAY COOLING BY USING AN OPTIMIZED RECTANGULAR FINNED HEAT SINK
FLOW BOILING HEAT TRANSFER COEFFICIENT USED FOR THE DESIGN OF THE EVAPORATOR OF A REFRIGERATION MACHINE USING CO2 AS WORKING FLUID
Zukünftige Artikel
Analysis of Thermal Performance in a Two-phase Thermosyphon loop based on Flow Visualization and an Image Processing Technique
Investigation of the Effect of Dead State Temperature on the Performance of Boron Added Fuels and Different Fuels Used in an Internal Combustion Engine.
PREDICTION OF PARAMETERS OF BOILER SUPERHEATER BASED ON TRANSFER LEARNING METHOD
A temperature pre-rectifier with continuous heat storage and release for waste heat recovery from periodic flue gas
Study on the Influence of Multi-Frequency Noise on the Combustion Characteristics of Pool Fires in Ship Engine Rooms
Experimental study on two-phase nonlinear oscillation behavior of miniaturized gravitational heat pipe
Flow boiling heat transfer Coefficient used for the Design of the Evaporator of a Refrigeration Machine using CO2 as Working Fluid
Analyzing The Heat and Flow Characteristics In Spray Cooling By Using An Optimized Rectangular Finned Heat Sink
Thermal management of lithium-ion battery packs by using corrugated channels with nano-enhanced cooling
Convective heat transfer inside a rotating helical pipe filled with saturated porous media
Preparation method and thermal performance of a new ultra-thin flexible flat plate heat pipe
Influence of Temperature Gradients and Fluid Vibrations on the Thermocapillary Droplet Behavior in a Rotating Cylinder
The Effect of Corrugation on Heat Transfer and Pressure Drop in a Solar Air Heater: A Numerical Investigation
Investigation of the Effect of Using Different Nanofluids on the Performance of the Organic Rankine Cycle
Entropy generation and heat transfer performance of cylindrical tube heat exchanger with perforated conical rings: a numerical study
Molecular dynamics study of the thermal transport properties in the graphene/C3N multilayer in-plane heterostructures
Flow boiling critical heat flux in a small tube for FC-72
STUDY OF FORCED ACOUSTIC OSCILLATIONS INFLUENCE ON METHANE OXIDATION PROCESS IN OXYGEN-CONTAINING FLOW OF HYDROGEN COMBUSTION PRODUCTS
Examining the Synergistic Use of East-West Reflector and Coal Cinder in Trapezoidal Solar Pond through Energy Analysis