Abo Bibliothek: Guest
Digitales Portal Digitale Bibliothek eBooks Zeitschriften Referenzen und Berichte Forschungssammlungen
International Journal of Energetic Materials and Chemical Propulsion
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN Druckformat: 2150-766X
ISSN Online: 2150-7678

International Journal of Energetic Materials and Chemical Propulsion

DOI: 10.1615/IntJEnergeticMaterialsChemProp.v6.i6.20
pages 681-690

COMBUSTION OF MAGNESIUM - STRONTIUM NITRATE PYROTECHNIC MIXTURE. EFFECT OF SOME FACTORS ON STABLE COMBUSTION AND EMISSION OF RED LIGHT

Kitty Riveros Flores
FAMAE, Munitions and Propellants Division, Talagante 163, Manuel Rodriguez 02
Jorge Perez Suarez
FAMAE, Munitions and Propellants Division, Talagante 163, Manuel Rodriguez 02
Jose Fuenzalida Alessandri
FAMAE, Munitions and Propellants Division, Talagante 163, Manuel Rodriguez 02
Carlos Lobos Villalon
FAMAE, Munitions and Propellants Division, Talagante 163, Manuel Rodriguez 02
Nikola Orbovic
FAMAE, Munitions and Propellants Division, Talagante 163, Manuel Rodriguez 02

ABSTRAKT

The combustion of magnesium−strontium nitrate pyrotechnic compositions has been investigated. This combination is used in light-producing pyrotechnic mixture for red light flame radiation during combustion. A mixture of magnesium, strontium nitrate, potassium perchlorate, and chlorinated rubber was chosen for this work. The principle goal of the task was obtaining two very important characteristics of the red light-producing mixture: luminous intensity and color value (percentage of total emission in the red spectral range, 630-690 nm). Also, the goals of our work were obtaining the pyrotechnic mixture with stable combustion, well defined flame and high energy output. During the work, some changes of pattern composition were made to achieve the best combustion and maximum red color emission of the flame. In addition to formulation, the authors also investigated how the change in the raw materials' average particle size, mixture preparation procedure, and pressure loading affect the functionality and stable combustion of the mixture in the final devices. The average particle size and pressure loading had the most important effect on the functionality. Some thermochemical calculations for each composition are given.


Articles with similar content:

TWO-PHASE FLAMES — A POTENTIAL METHOD FOR MANUFACTURING SUBMICRON METAL OXIDE POWDERS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
Yu. Kostishin, N. D. Ageyev, S. Kyro
APPROPRIATENESS OF BURNING RATE MEASURING TECHNIQUE WITH THE MEASURING CONDITIONS AND REQUESTED DATA
International Journal of Energetic Materials and Chemical Propulsion, Vol.17, 2018, issue 4
Ondrej Vodochodsky, Ahmed Maraden, Robert Matyas, Petr Stojan
A SURVEY OF PRESSURE-DRIVEN BURNING OF ENERGETIC SOLIDS WITH ARRHENIUS SURFACE PYROLYSIS
International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
M. Verri, A. Jalongo, Luigi Pietro Maria Colombo, Fabio Cozzi
Critical Conditions for Single Droplets Ignition and Combustion
International Journal of Fluid Mechanics Research, Vol.24, 1997, issue 1-3
K. Yoo, V. I. Kolesnikov-Svinarev, G. P. Kuznetsov, Igor G. Assovskiy
Historical Lecture on Alfred B. Nobel
ALFRED NOBEL: FROM GUNPOWDER TO BALLISTIT

International Journal of Energetic Materials and Chemical Propulsion, Vol.4, 1997, issue 1-6
Bertil Enoksson