图书馆订阅: Guest
Thermal Sciences 2004. Proceedings of the ASME - ZSIS International Thermal Science Seminar II
June, 13-16, 2004, Bled, Slovenia

DOI: 10.1615/ICHMT.2004.IntThermSciSemin


ISBN Print: 978-9-61913-930-1

Experimentation and Simulation of Thermal Energy Storage System with Non-Phase Change Materials

pages 497-500
DOI: 10.1615/ICHMT.2004.IntThermSciSemin.590
Get accessGet access

摘要

This research a simulation study and experiment on the thermal energy storage system with non-phase change materials in the range of 50° − 150°C, this system is consisted of the storage tank size of 0.58 m in diameter, and 0.88 m in height, containing each set of the charging coil, and the discharging coil, embedded in the combination of 90% by volume of the used — engine oil, and 10% by volume of the river — water rocks. An electric heater is used as the heat source. The simulation of thermal-energy storage system with the mathematic modeling for the theoretical analysis of the system, and by using the Newton — Raphson method in the simulation process during the energy charging and discharging processes, The limitation of the charging oil temperature is maintained at 140°C with the flow rate in the range of 10 to 18 l/min, whereas the inlet temperature of the discharge oil is maintained at 30°C with the flow rate of 6 to 14 l/min.
The computer simulation results with the charging time of 2 hours, and the oil flow rate of 14 l/min, The temperature of our storage media is increased by 60°C with the amount of heat gain by 23 MJ. And by our further simulation on discharging for 1 hour period, with the oil flow rate of 10 l/min, the storage temperature is decreased by 58°C, with the amount of heat removal of 23 MJ. It is found that results from the experiment are differed from the simulation by 3−5 %

Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集 订购及政策 Begell House 联系我们 Language English 中文 Русский Português German French Spain