图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
国际流体力学研究期刊
ESCI SJR: 0.22 SNIP: 0.446 CiteScore™: 0.5

ISSN 打印: 2152-5102
ISSN 在线: 2152-5110

国际流体力学研究期刊

DOI: 10.1615/InterJFluidMechRes.v28.i4.50
12 pages

The Effect of Weak Shock Waves on Elastic Barriers with Constructive Heterogeneity

L. B. Lerman
Special Design and Engineering Office of S. P. Timoshenko's Institute of Mechanics of National Academy of Sciences of Ukraine, Kyiv, Ukraine

ABSTRACT

The unsteady combined problem of acousto-elasticity for layered shielding constructions, stiffened by a system of rod supports, is solved. The mechanical system under considered is decomposed into discrete units. The motion of each component is described by the corresponding differential equations. The unknown forces of interaction of the elastic units are determined from the additional conditions of joint deformations of the plate and supports. The surface load is determined from the conditions of continuous contact of the barrier and the media during the simultaneous motion. These conditions are presented in the form of systems of functional equations. Representation of the unknown functions, loads and reactions in the form of series with respect to the vector functions, describing the eigenmodes of the discrete components of the system, including the volumes filled by gas, enables the functional equations to be reduced to the infinite system of integro-differential equations of the Volterra type. The solution of the system is constructed numerically by the successive approximation method with the system of equations of the dynamic contact problem solved at every step of the iterative process. The stress-strain characteristics of the system's units on exposure to the stepwise weak shock waves are determined for some particular values of the problem's parameters. It is shown that the influence of the surrounding medium is evident even at the first extremums. The influence on the deflection and on the rate of deflection is found to be more considerable than on the deformation and the rate of deformation. It is found that, with the pressure jump at the wave front taken for the intensity of the static load, the maximum amplification factor is close to four, and depends on the flexural rigidity of the plate.


Articles with similar content:

Basic and Weight Functions of the Problem of Nonlinear Surface Impedance Antenna Analysis by the Moment Method
Telecommunications and Radio Engineering, Vol.58, 2002, issue 9&10
D. S. Gavva, M. A. Omarov, A. I. Luchaninov
Properties of Optimal Sets of External Practical Weak Stability of Differential Inclusions
Journal of Automation and Information Sciences, Vol.36, 2004, issue 1
Fedor G. Garashchenko, Vladimir V. Pichkur
Sound Radiation by an Array Formed by Coaxial Cylindrical Piezoceramic Shells with the End Baffles
International Journal of Fluid Mechanics Research, Vol.32, 2005, issue 5
I. V. Vovk, V. T. Matsypura
THERMOACOUSTIC STREAMING ON A CYLINDER
Proceedings of Symposium on Energy Engineering in the 21st Century (SEE2000) Volume I-IV, Vol.0, 2000, issue
Ashok Gopinath
On Determining the Parameters of Sinusoids
Journal of Automation and Information Sciences, Vol.47, 2015, issue 2
Alexander S. Apostolyuk, Vladimir B. Larin