每年出版 12 期
ISSN 打印: 1044-5110
ISSN 在线: 1936-2684
Indexed in
A SIMPLIFIED MAXIMUM-ENTROPY-BASED DROP SIZE DISTRIBUTION
摘要
A simplified approach is presented for description of the drop size distribution in a spray, based on the application of the maximum entropy formalism (MEF). This approach succeeds in separating the constraints on drop she from those on drop velocity, providing results for the size distribution that are independent of the constraints on velocity. The solution is insensitive to the limits of integration, deriving all physical information directly from the constraint equations.
Results are presented that compare the present work with phase Doppler measurements by the authors, as well as with data from the literature. These results show that the MEF drop size distribution compares favorably with other methods of predicting and describing drop size distributions.
-
Dumouchel Christophe, A New Formulation of the Maximum Entropy Formalism to Model Liquid Spray Drop-Size Distribution, Particle & Particle Systems Characterization, 23, 6, 2006. Crossref
-
Lee T.-W., Ryu J.-H., Analyses of spray break-up mechanisms using the integral form of the conservation equations, Combustion Theory and Modelling, 18, 1, 2014. Crossref
-
GIANNADAKIS E., GAVAISES M., ARCOUMANIS C., Modelling of cavitation in diesel injector nozzles, Journal of Fluid Mechanics, 616, 2008. Crossref
-
Liao Y., Sakman A. T., Jeng S. M., Jog M. A., Benjamin M. A., A Comprehensive Model to Predict Simplex Atomizer Performance, Journal of Engineering for Gas Turbines and Power, 121, 2, 1999. Crossref
-
Kim Woo Tae, Mitra Sushanta K., Li Xianguo, Prociw L. A., Hu T. C. J., A Predictive Model for the Initial Droplet Size and Velocity Distributions in Sprays and Comparison with Experiments, Particle & Particle Systems Characterization, 20, 2, 2003. Crossref
-
Roth H., Giannadakis E., Gavaises M., Arcoumanis C., Omae K., Sakata I., Nakamura M., Yanagihara H., Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes, SAE Technical Paper Series, 1, 2005. Crossref
-
Lee T.-W., Lee J. Y., Do Y. H., Momentum Effects on the Spray Drop Size, Calculated from the Integral Form of the Conservation Equations, Combustion Science and Technology, 184, 3, 2012. Crossref
-
Sirignano W.A, Mehring C, Review of theory of distortion and disintegration of liquid streams, Progress in Energy and Combustion Science, 26, 4-6, 2000. Crossref
-
Tonini S., Gavaises M., Theodorakakos A., The role of droplet fragmentation in high-pressure evaporating diesel sprays, International Journal of Thermal Sciences, 48, 3, 2009. Crossref
-
Babinsky E., Sojka P.E., Modeling drop size distributions, Progress in Energy and Combustion Science, 28, 4, 2002. Crossref
-
Jones D.P., Watkins A.P., Droplet size and velocity distributions for spray modelling, Journal of Computational Physics, 231, 2, 2012. Crossref
-
Arcoumanis C., Gavaises M., French B., Effect of Fuel Injection Processes on the Structure of Diesel Sprays, SAE Technical Paper Series, 1, 1997. Crossref
-
Tharakan T. John, Mukhopadhyay Achintya, Datta Amitava, Jog Milind A., Trends in Comprehensive Modeling of Spray Formation, International Journal of Spray and Combustion Dynamics, 5, 2, 2013. Crossref
-
Haeri S., Shrimpton J.S., A mesoscopic description of polydispersed particle laden turbulent flows, Progress in Energy and Combustion Science, 37, 6, 2011. Crossref
-
Mitra S.K., Xianguo Li , A comprehensive model on spray formation process and probability distribution of subsequently formed spray droplets, IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203), 1997. Crossref
-
Fisenko S.P., Brin A.A., Petruchik A.I., Evaporative cooling of water in a mechanical draft cooling tower, International Journal of Heat and Mass Transfer, 47, 1, 2004. Crossref
-
Park Ki Sun, Heister Stephen D., Nonlinear modeling of drop size distributions produced by pressure-swirl atomizers, International Journal of Multiphase Flow, 36, 1, 2010. Crossref
-
Movahednejad E., Ommi F., Hosseinalipour S. M., Chen C. P., Mahdavi S. A., Application of maximum entropy method for droplet size distribution prediction using instability analysis of liquid sheet, Heat and Mass Transfer, 47, 12, 2011. Crossref
-
Hosseinalipour Seyed Mostafa, Karimaei Hadiseh, A new model based on coupling of MEP/CFD/ILIA for prediction of primary atomization, The Canadian Journal of Chemical Engineering, 94, 4, 2016. Crossref
-
Distortion and Disintegration of Liquid Streams, in Liquid Rocket Thrust Chambers, 2004. Crossref
-
Movahednejad Ehsan, Ommi Fathollah, Hosseinalipour S. Mostafa, Prediction of Droplet Size and Velocity Distribution in Droplet Formation Region of Liquid Spray, Entropy, 12, 6, 2010. Crossref
-
Fuel Injection, in Gas Turbine Combustion, 2010. Crossref
-
Lee T.-W, An Keju, Quadratic formula for determining the drop size in pressure-atomized sprays with and without swirl, Physics of Fluids, 28, 6, 2016. Crossref
-
Dumouchel Christophe, The Maximum Entropy Formalism and the Prediction of Liquid Spray Drop-Size Distribution, Entropy, 11, 4, 2009. Crossref
-
Li Xianguo, Li Meishen, Droplet Size Distribution in Sprays Based on Maximization of Entropy Generation, Entropy, 5, 5, 2003. Crossref
-
Hosseinalipour Seyed Mostafa, Karimaei Hadiseh, Movahednejad Ehsan, Ommi Fathollah, Application of maximum entropy principle for estimation of droplet-size distribution using internal flow analysis of a swirl injector, International Journal of Spray and Combustion Dynamics, 8, 3, 2016. Crossref
-
Sindayihebura Daniel, Cousin Jean, Dumouchel Christophe, Experimental and Theoretical Study of Sprays Produced by Ultrasonic Atomisers, Particle & Particle Systems Characterization, 14, 2, 1997. Crossref
-
Dasgupta Debayan, Nath Sujit, Bhanja Dipankar, A study on dual role of viscosity on the stability of a viscous planar liquid sheet surrounded by inviscid gas streams of equal velocities, and prediction of resulting droplet distribution using maximum entropy formulation, Physics of Fluids, 31, 7, 2019. Crossref
-
Shrimpton J. S., Haeri S., Scott Stephen J., PDF Reconstruction Methods, in Statistical Treatment of Turbulent Polydisperse Particle Systems, 2014. Crossref
-
Déchelette A., Babinsky E., Sojka P. E., Drop Size Distributions, in Handbook of Atomization and Sprays, 2011. Crossref
-
Sirignano W., Mehring C., Review of theory of distortion and disintegration of liquid streams, 30th Fluid Dynamics Conference, 1999. Crossref
-
Lee T.-W., Robinson Dan, Calculation of the Drop Size Distribution and Velocities from the Integral Form of the Conservation Equations, Combustion Science and Technology, 183, 3, 2010. Crossref
-
Fritsching Udo, Spray Simulation, 2004. Crossref
-
MOHAMMADI Alireza, OMMI Fathollah, Numerical and experimental study of twin-fluid two-phase internal-mixing atomizer to develop maximum entropy method, Chinese Journal of Aeronautics, 33, 9, 2020. Crossref
-
Popp Michael, Hulka James, Yang Vigor, Habiballah Mohammed, Liquid Rocket Thrust Chambers, 2004. Crossref
-
Mondal D, Datta A, Sarkar A, Droplet size and velocity distributions in a spray from a pressure swirl atomizer: Application of maximum entropy formalism, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218, 7, 2004. Crossref
-
Chen Fanghui, Yapa Poojitha D., Estimating the Oil Droplet Size Distributions in Deepwater Oil Spills, Journal of Hydraulic Engineering, 133, 2, 2007. Crossref
-
Niu Lu, Deng Xiangdong, Instability of Viscoelastic Liquid Sheets in a Transverse Electric Field, Mathematics, 10, 19, 2022. Crossref