图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.2013006503
pages 843-860

NUMERICAL INVESTIGATION OF VARIOUS SPRAY BREAKUP AND DROPLET COLLISION MODELS IN THE MODELING OF IN-CYLINDER FUEL SPRAY

Reza Kamali
Department of Mechanical Engineering, Shiraz University, Shiraz, Iran
M. Mofarrahi
Department of Mechanical Engineering, Shiraz University, Shiraz, Iran

ABSTRACT

Fuel atomization and dispersion are complicated physical phenomena which play crucial roles in diesel engine combustion. The models adopted for simulation of these processes strongly affect the accuracy of the calculation results. The purpose of present study is to numerically investigate the effects of various droplet collision and spray breakup models on in-cylinder fuel spray characteristics as well as in-cylinder pressure. The numerical simulation procedures are based on a Lagrangian drop and an Eulerian gas formulation. This paper tries to indicate the differences between the effects of these various models on spray characteristics as well as in-cylinder pressure in a caterpillar heavy-duty diesel engine and present some practical reasons for probable distinctions. The simulation results showed the significant influence of different spray breakup models on fuel spray penetration and in-cylinder pressure. Experimental data have been used to validate the numerical results.


Articles with similar content:

EFFECTS OF DIFFERENT TURBULENT DISPERSION AND SPRAY BREAKUP MODELS ON THREE-DIMENSIONAL MODELING OF IN-CYLINDER FUEL SPRAY
Computational Thermal Sciences: An International Journal, Vol.5, 2013, issue 1
M. Mofarrahi, Reza Kamali
NUMERICAL ANALYSIS OF THE INFLUENCE OF THE JET BREAKUP MODEL FORMULATION ON DIESEL ENGINE COMBUSTION COMPUTATIONS
Atomization and Sprays, Vol.8, 1998, issue 2
M. C. Cameretti, C. Bertoli, P. Belardini
ASSESSMENT OF ATOMIZATION MODELS FOR DIESEL ENGINE SIMULATIONS
Atomization and Sprays, Vol.19, 2009, issue 9
S. Som, Suresh Aggarwal
THREE-DIMENSIONAL SIMULATION OF EFFERVESCENT ATOMIZATION SPRAY
Atomization and Sprays, Vol.19, 2009, issue 1
Jianzhong Lin, Ze-Fei Zhu, Hong-Bing Xiong
DEVELOPMENT OF A COMPUTING PROCEDURE FOR THE SEQUENTIAL ATOMIZATION PROCESS OF A MULTIAPERTURE INJECTOR AND A SWIRL INJECTOR
Atomization and Sprays, Vol.29, 2019, issue 9
Norihide Ouchi, Jun Ishimoto, Nobuhiko Yamaguchi, Nobuyuki Furukawa, Naoya Ochiai, Yuzuru Sasaki, Akira Arioka, Yasuhiro Komatsu