图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v20.i4.60
pages 345-364

COMBINED SPRAY MODEL FOR GASOLINE DIRECT INJECTION HOLLOW-CONE SPRAYS

Philipp Pischke
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52062 Aachen, Germany
D. Martin
Institute of Heat and Mass Transfer, RWTH Aachen University, Eilfschornsteinstr. 18, 52062 Aachen, Germany
Reinhold Kneer
Institute of Heat and Mass Transfer, RWTH Aachen University, Augustinerbach 6, 52062 Aachen, Germany

ABSTRACT

Piezoinjectors with outwardly opening nozzles are the latest generation of high-pressure injectors for gasoline direct injection (GDI). In this study, a combined Eulerian-Lagrangian spray model is presented, which is based on user-defined implementations of all key models within a Fluent framework. Primary and secondary breakup is modeled with a combined LISA-KH-TAB approach. The LISA primary breakup model is extended by a one-dimensional model of the nozzle flow and by modified momentum source terms that lead to a more reasonable prediction of the near-nozzle continuous phase flow field. The KH and TAB secondary breakup models are applied to high and low Weber number secondary breakup, respectively. The collision model implemented accounts for all relevant collision regimes (i.e., coalescence, stretching separation, reflexive separation, and bouncing). For the bouncing and reflexive separation regimes, the momentum equations are modified because the standard equations cannot predict the trajectories after off-center collisions of differently sized droplets. Vaporization is modeled with a single-component model, which employs an analytical solution of the coupled heat and mass transfer equations. The combined model is validated with light scattering visualization and light sheet measurements, phase-doppler anemometry (PDA), and laser correlation velocimetry (LCV) at pressurized vaporizing- and nonvaporizing conditions. The validation indicates a good agreement of both macroscopic and microscopic properties, such as the spray geometry, vortex positions, or drop size distributions.


Articles with similar content:

LINKING NOZZLE FLOW WITH SPRAY CHARACTERISTICS IN A DIESEL FUEL INJECTION SYSTEM
Atomization and Sprays, Vol.8, 1998, issue 3
Manolis Gavaises, C. Arcoumanis
DEVELOPMENT AND VALIDATION OF A FLASH BOILING MODEL FOR SINGLE-COMPONENT FUEL DROPLETS
Atomization and Sprays, Vol.27, 2017, issue 11
Shiyou Yang
LIQUID AND VAPOR SPRAY STRUCTURE IN HIGH-PRESSURE COMMON RAIL DIESEL INJECTION
Atomization and Sprays, Vol.11, 2001, issue 5
Gilles Bruneaux
STUDIES OF GASOLINE DIRECT-INJECTION SPRAYS AT ELEVATED AMBIENT GAS TEMPERATURES AND PRESSURES
Atomization and Sprays, Vol.22, 2012, issue 4
M. Gold, Phil J. Bowen, S. M. Sapsford, Peter J. Kay
ASSESSMENT OF ATOMIZATION MODELS FOR DIESEL ENGINE SIMULATIONS
Atomization and Sprays, Vol.19, 2009, issue 9
S. Som, Suresh Aggarwal