图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
雾化与喷雾
影响因子: 1.737 5年影响因子: 1.518 SJR: 0.814 SNIP: 1.18 CiteScore™: 2.2

ISSN 打印: 1044-5110
ISSN 在线: 1936-2684

卷:
卷 30, 2020 卷 29, 2019 卷 28, 2018 卷 27, 2017 卷 26, 2016 卷 25, 2015 卷 24, 2014 卷 23, 2013 卷 22, 2012 卷 21, 2011 卷 20, 2010 卷 19, 2009 卷 18, 2008 卷 17, 2007 卷 16, 2006 卷 15, 2005 卷 14, 2004 卷 13, 2003 卷 12, 2002 卷 11, 2001 卷 10, 2000 卷 9, 1999 卷 8, 1998 卷 7, 1997 卷 6, 1996 卷 5, 1995 卷 4, 1994 卷 3, 1993 卷 2, 1992 卷 1, 1991

雾化与喷雾

DOI: 10.1615/AtomizSpr.v6.i4.50
pages 461-483

ATOMIZATION CHARACTERISTICS OF PRESSURE-MODULATED AUTOMOTIVE PORT INJECTOR SPRAYS

Fu-Quan Zhao
Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202
Amer Ahmad Amer
Department of Mechanical Engineering, Wayne State University, Detroit, MI 48202
John L. Dressler
Fluid Jet Associates, Dayton, Ohio, U.S.A.

ABSTRACT

Selected standard automotive port fuel injectors were retrofitted to a novel pressure-modulation piezoelectric driver to study the effect of fuel-line pressure perturbation on the spray atomization characteristics. Unlike many other piezoelectric atomizers, this unit does not drive the nozzle directly but generates a pressure perturbation inside the fuel line. It has a small size and can be installed easily between a regular gasoline port injector and the fuel line. The pressure modulator and the fuel injector are controlled separately, by different drivers; therefore, there is no extra control difficulty with this fuel system. The global spray structures were visualized using the planar laser Mie scattering (PLMS) techniques, and the spray atomization processes were quantified using phase Doppler analyzer (PDA). Four standard gasoline port injectors were tested in this study, including the central port injection (CPI), electrostatic-discharge machined (EDM) director-plate, compound silicon−micromachined (CSMM), and dual-stream (DS) injectors. The experimental results showed that the global structure of the gasoline spray is changed dramatically by this technique. In particular, this technique can greatly enhance the spray atomization process of some gasoline port injectors and is also effective in redistributing the liquid fuel spatially. The spray behavior showed a strong dependence on the driving frequency and power of the pressure modulator. The optimal operating condition for the pressure modulation device, however, depends on the injector design.


Articles with similar content:

CHARACTERISTICS OF SPRAYS THROUGH A WALL IMPINGEMENT INJECTOR
Atomization and Sprays, Vol.14, 2004, issue 4
Takao Inamura, Terutoshi Tomoda
AN EXPERIMENT STUDY ON PHENOMENON AND MECHANISM OF FLASH BOILING SPRAY FROM A MULTI-HOLE GASOLINE DIRECT INJECTOR
Atomization and Sprays, Vol.23, 2013, issue 5
Shenghua Yang, Zhiping Song, Zhuo Yao, Tianyou Wang
EFFECT OF THE LIQUID INJECTION ANGLE ON THE ATOMIZATION OF LIQUID JETS IN SUBSONIC CROSSFLOWS
Atomization and Sprays, Vol.24, 2014, issue 1
H. Almeida, J. M. M. Sousa, Mário Costa
INFLUENCE OF VORTEX FLOW AND CAVITATION ON NEAR-NOZZLE DIESEL SPRAY DISPERSION ANGLE
Atomization and Sprays, Vol.19, 2009, issue 3
Manolis Gavaises, A. Andriotis
NUMERICAL ANALYSIS OF THE INFLUENCE OF DIESEL NOZZLE DESIGN ON INTERNAL FLOW CHARACTERISTICS FOR 2-VALVE DIESEL ENGINE APPLICATION
Atomization and Sprays, Vol.23, 2013, issue 2
Joaquin De la Morena, Kshitij Neroorkar, Alejandro H. Plazas, David P. Schmidt, Richard C. Peterson