每年出版 12 期
ISSN 打印: 1044-5110
ISSN 在线: 1936-2684
Indexed in
ENHANCEMENT OF THE ATOMIZATION OF A LIQUID JET BY CAVITATION IN A NOZZLE HOLE
摘要
It has been clarified that great turbulence in the nozzle hole, due to cavitation phenomena, contributes greatly to the disintegration of the liquid jet. When cavitation occurs in the nozzle hole, the atomization of the liquid jet is enhanced considerably. On the basis of the result, this article presents a method for obtaining an excellent spray under low injection pressure, using the disturbance of the liquid flow caused by cavitation. The results of the present study indicate that enhancement of the atomization of the liquid jet is possible by simply installing a wire net over the inlet of the nozzle bole and making a gap at the nozzle hole.
-
YEH Chun-Lang, Numerical Investigation of Liquid Jet Emanating from Plain-Orifice Atomizers with Chamfered or Rounded Orifice Inlets, JSME International Journal Series B, 47, 1, 2004. Crossref
-
Yeh Chun-Lang, Turbulent flow investigation inside and outside plain-orifice atomizers with rounded orifice inlets, Heat and Mass Transfer, 41, 9, 2005. Crossref
-
Dabiri S., Sirignano W. A., Joseph D. D., Cavitation in an orifice flow, Physics of Fluids, 19, 7, 2007. Crossref
-
Anantharamaiah N., Vahedi Tafreshi H., Pourdeyhimi B., A study on hydroentangling waterjets and their impact forces, Experiments in Fluids, 41, 1, 2006. Crossref
-
DABIRI SADEGH, SIRIGNANO WILLIAM A., JOSEPH DANIEL D., Two-dimensional and axisymmetric viscous flow in apertures, Journal of Fluid Mechanics, 605, 2008. Crossref
-
Dabiri S., Sirignano W. A., Joseph D. D., A numerical study on the effects of cavitation on orifice flow, Physics of Fluids, 22, 4, 2010. Crossref
-
Son Younggon, Migler Kalman B., Cavitation of polyethylene during extrusion processing instabilities, Journal of Polymer Science Part B: Polymer Physics, 40, 24, 2002. Crossref
-
Jia Ming, Xie Maozhao, Liu Hong, Lam Wei-Haur, Wang Tianyou, Numerical simulation of cavitation in the conical-spray nozzle for diesel premixed charge compression ignition engines, Fuel, 90, 8, 2011. Crossref
-
Blokkeel G., Barbeau B., Borghi R., A 3D Eulerian Model to Improve the Primary Breakup of Atomizing Jet, SAE Technical Paper Series, 1, 2003. Crossref
-
Yeh Chun-Lang, Numerical Study of Inlet and Geometry Effects on Discharge Coefficients for Liquid Jet Emanating From a Plain-Orifice Atomizer, Journal of Mechanics, 18, 3, 2002. Crossref
-
Gemci T., Yakut K., Chigier N., Ho T.C., Experimental study of flash atomization of binary hydrocarbon liquids, International Journal of Multiphase Flow, 30, 4, 2004. Crossref
-
Tseng Kuo-Tung, Collicott Steven H., Demonstration of a Fluidic Spray Control Orifice, Journal of Propulsion and Power, 27, 3, 2011. Crossref
-
De Giorgi M. G., Ficarella A., Tarantino M., A Data Acquisition System to Detect Bubble Collapse Time and Pressure Losses in Water Cavitation, in Advanced Instrument Engineering, 2013. Crossref
-
Tseng Kuo-Tung, Collicott Steven H., Experimental and numerical investigations of mechanisms in fluidic spray control, International Journal of Multiphase Flow, 61, 2014. Crossref
-
Jia Ming, Hou Deyang, Li Jianzhao, Xie Maozhao, Liu Hong, A Micro-Variable Circular Orifice Fuel Injector for HCCI-Conventional Engine Combustion - Part I Numerical Simulation of Cavitation, SAE Technical Paper Series, 1, 2007. Crossref
-
Mariasiu Florin, Numerical Investigation of the Effects of Biofuel Characteristics on the Injector Nozzle Erosion Process, Tribology Transactions, 56, 2, 2013. Crossref
-
Örley F., Trummler T., Hickel S., Mihatsch M. S., Schmidt S. J., Adams N. A., Large-eddy simulation of cavitating nozzle flow and primary jet break-up, Physics of Fluids, 27, 8, 2015. Crossref
-
Stanley C., Barber T., Milton B., Rosengarten G., Periodic cavitation shedding in a cylindrical orifice, Experiments in Fluids, 51, 5, 2011. Crossref
-
Mauger C., Méès L., Michard M., Lance M., Velocity measurements based on shadowgraph-like image correlations in a cavitating micro-channel flow, International Journal of Multiphase Flow, 58, 2014. Crossref
-
Wang Xiang, Su Wanhua, Influence of Injection Pressure Fluctuations on Cavitation inside a Nozzle Hole at Diesel Engine Conditions, SAE Technical Paper Series, 1, 2008. Crossref
-
De Giorgi M.G., Ficarella A., Tarantino M., Evaluating cavitation regimes in an internal orifice at different temperatures using frequency analysis and visualization, International Journal of Heat and Fluid Flow, 39, 2013. Crossref
-
Mohan Balaji, Yang Wenming, Yu Wenbin, Effect of internal nozzle flow and thermo-physical properties on spray characteristics of methyl esters, Applied Energy, 129, 2014. Crossref
-
Mohan Balaji, Yang Wenming, Chou Siaw kiang, Development of an accurate cavitation coupled spray model for diesel engine simulation, Energy Conversion and Management, 77, 2014. Crossref
-
Ramamurthi K., Nandakumar K., Patnaik R. K., Characteristics of Sprays Formed by Impingement of a Pair of Liquid Jets, Journal of Propulsion and Power, 20, 1, 2004. Crossref
-
Dabiri Sadegh, Sirignano William, Joseph Daniel, Effects of Cavitation on the Breakup of Liquid Jets: Bubble Growth, Distortion, and Collapse in an Orifice Flow, 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition, 2009. Crossref
-
Dabiri Sadegh, Sirignano William, Joseph Daniel, Cavitation in an Orifice Flow, 45th AIAA Aerospace Sciences Meeting and Exhibit, 2007. Crossref
-
Ghorbani Morteza, Yildiz Mehmet, Gozuacik Devrim, Kosar Ali, Cavitating nozzle flows in micro- and minichannels under the effect of turbulence, Journal of Mechanical Science and Technology, 30, 6, 2016. Crossref
-
Yin B., Yu S., Jia H., Yu J., Numerical research of diesel spray and atomization coupled cavitation by Large Eddy Simulation (LES) under high injection pressure, International Journal of Heat and Fluid Flow, 59, 2016. Crossref
-
Tseng Kuotung, Collicott Steven, Internal Flows in Fluidic Spray Control, 36th AIAA Fluid Dynamics Conference and Exhibit, 2006. Crossref
-
Gopala Yogish, Zhang Peng, Bibik Oleksandr, Lubarsky Eugene, Zinn Ben, Liquid Fuel Jet in Crossflow -Trajectory Correlations based on the Column Breakup Point, 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010. Crossref
-
TAMAKI Nobushige, MORIMOTO Kensuke, CHIBA Mikito, ONO Jyunichi, Improvement of Atomization Characteristics of Direct Injection Diesel Nozzle(Thermal Engineering), Transactions of the Japan Society of Mechanical Engineers Series B, 75, 757, 2009. Crossref
-
Liu Hong, Cai Chang, Xi Xi, Yan Yan'an, Jia Ming, A novel model for the bubble growth in the cavitation region of an injector nozzle, International Journal of Heat and Mass Transfer, 119, 2018. Crossref
-
Vahedi Tafreshi H., Pourdeyhimi B., Simulating Cavitation and Hydraulic Flip Inside Hydroentangling Nozzles, Textile Research Journal, 74, 4, 2004. Crossref
-
TAMAKI Nobushige, KATO Kousuke, KATO Atsushi, IMANO Keita, Improvement of Atomization Characteristics of Spray by Multi-Hole Nozzle(Thermal Engineering), Transactions of the Japan Society of Mechanical Engineers Series B, 76, 771, 2010. Crossref
-
Örley Felix, Hickel Stefan, Schmidt Steffen J, Adams Nikolaus A, Large-Eddy Simulation of turbulent, cavitating fuel flow inside a 9-hole Diesel injector including needle movement, International Journal of Engine Research, 18, 3, 2017. Crossref
-
Rachakonda Sampath K., Wang Yue, Grover Ronald O., Moulai Maryam, Baldwin Eli, Zhang Gaoming, Parrish Scott, Diwakar Ramachandra, Kuo Tang-Wei, Schmidt David P., A computational approach to predict external spray characteristics for flashing and cavitating nozzles, International Journal of Multiphase Flow, 106, 2018. Crossref
-
Li Bing, Hu Xue Song, Cao Xiao Feng, Jia Gui Qi, Xie Fang Xi, Hong Wei, Study on Influence of Nozzle Structure on Flow in Diesel Nozzle Orifice, Applied Mechanics and Materials, 246-247, 2012. Crossref
-
Roth H., Giannadakis E., Gavaises M., Arcoumanis C., Omae K., Sakata I., Nakamura M., Yanagihara H., Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes, SAE Technical Paper Series, 1, 2005. Crossref
-
Khojasteh-Manesh Masoud, Mahdi Miralam, Evaluation of Cavitation Erosion Intensity in a Microscale Nozzle Using Eulerian–Lagrangian Bubble Dynamic Simulation, Journal of Fluids Engineering, 141, 6, 2019. Crossref
-
Yang Shangze, Ma Zhen, Li Xuesong, Hung David L.S., Xu Min, A review on the experimental non-intrusive investigation of fuel injector phase changing flow, Fuel, 259, 2020. Crossref
-
Befrui B., Corbinelli G., Hoffmann G., Andrews R. J., Sankhalpara S. R., Cavitation and Hydraulic Flip in the Outward-Opening GDi Injector Valve-Group, SAE Technical Paper Series, 1, 2009. Crossref
-
Yang Shangze, Wang Shangning, Sun Zhe, Li Xuesong, Hung David L.S., Xu Min, In-nozzle bubble formation and its effect on fuel jet breakup under cavitating and flash boiling conditions, Applied Thermal Engineering, 183, 2021. Crossref
-
Sun Daoan, Cai Wenzhe, Li Chunying, Lu Jian, Experimental study on atomization characteristics of high-energy-density fuels using a fuel slinger, Energy, 234, 2021. Crossref
-
De Giorgi M. G., Ficarella A., Tarantino M., A Data Acquisition System to Detect Bubble Collapse Time and Pressure Losses in Water Cavitation, International Journal of Measurement Technologies and Instrumentation Engineering, 1, 1, 2011. Crossref
-
Sou Akira, Hosokawa Shigeo, Tomiyama Akio, Effects of cavitation in a nozzle on liquid jet atomization, International Journal of Heat and Mass Transfer, 50, 17-18, 2007. Crossref
-
Salvador F.J., Pastor J.M., De la Morena J., Martínez-Miracle E.C., Computational study on the influence of nozzle eccentricity in spray formation by means of Eulerian Σ - Y coupled simulations in diesel injection nozzles, International Journal of Multiphase Flow, 129, 2020. Crossref
-
Dahia Ahmed, Mokadem Boumaza, Amina Lyria Cheridi, Aguedal Hakim, Coupled VOF and Level-Set methods for simulating nozzle geometry effect on axisymmetric water jet breakup, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2022. Crossref