图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
国际计算热科学期刊
ESCI SJR: 0.249 SNIP: 0.434 CiteScore™: 0.7

ISSN 打印: 1940-2503
ISSN 在线: 1940-2554

国际计算热科学期刊

DOI: 10.1615/ComputThermalScien.2018024378
pages 147-160

BENCHMARKS FOR THE VALIDATION OF THE HEAT TRANSFER CAPABILITIES OF ONE-DIMENSIONAL SYSTEM CODES

Charl G. Jat Du Toit
School of Mechanical and Nuclear Engineering, North-West University, Private Bag X6001, Potchefstroom 2520, South Africa
N. I. Tak
Korea Atomic Energy Research Institute, Deajeon, Korea
Peter F. Niemand
School of Mechanical and Nuclear Engineering, North-West University, Potchefstroom, South Africa
M. H. Kim
Korea Atomic Energy Research Institute, Deajeon, Korea

ABSTRACT

The purpose of the reactor cavity cooling system in a nuclear plant is to effectively remove the heat released by the reactor pressure vessel. The reactor cavity cooling system must be able to operate safely in a natural or passive manner, particularly in the case of very high-temperature reactors in order to avoid accidents due to human error or the failure of components. Radiation, convection, and conduction heat transfer, as well as natural circulation, are the major natural phenomena that determine the performance of a reactor cavity cooling system. System codes are often used to simulate the operation of a reactor cavity cooling system under various conditions. It is important that the codes should be verified and validated. This is achieved by performing carefully controlled experiments and selecting suitable analytical examples. The experiments and analytical examples are modeled using the codes, and the simulation results obtained by the codes are then compared with the corresponding experimental and analytical results. This paper is concerned with two benchmark problems for which the analytical solutions can be obtained and used to validate the heat transfer capability of systems codes to model conduction, radiation, and convection. The systems codes GAMMA+ and Flownex are employed to demonstrate the application of the benchmark problems.