高温材料处理:国际期刊
每年出版 4 期
ISSN 打印: 1093-3611
ISSN 在线: 1940-4360
IF:
0.4
Immediacy Index:
0.1
Eigenfactor:
0.00005
JCI:
0.07
SJR:
0.198
SNIP:
0.48
CiteScore™::
1.1
H-Index:
20
Indexed in
LOW TEMPERATURE PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION OF CARBON FILMS ON DIFFERENT SUBSTRATES
卷 10,
册 3, 2006,
pp. 457-466
DOI: 10.1615/HighTempMatProc.v10.i3.90
摘要
Polymer and diamond like carbon thin films were deposited at temperature below 250°C by high frequency (40−60 MHz) plasma enhanced chemical vapor deposition. The films have been successfully deposited on metal (Ti, Cu, Mo, Ta, Ni, Pt), silicon, germanium, ceramic, quarts and glass flat substrates as well as on 3-D objects: metal balls, washer, tips, cones. Electron field emission, optical and electrical properties, mechanical and tribological behavior of the films were studied in comparison with their structure, phase and chemical composition. Plasma pre-treatment of the substrate, ion bombardment and etching of growing film surface were found to be the key factors of the film deposition process.
440 文章浏览量
14 文章下载
统计数据
相似内容的文章:
最新一期
DETERMINATION OF THE MASS BALANCE OF HIGH-CARBON FERROCHROME IN A SUBMERGED ARC FURNACE
RHEOLOGICAL BEHAVIOR AND 3D PRINTING OF HIGHLY FILLED ALUMINA-POLYAMIDE FILAMENTS DURING FUSED DEPOSITION MODELING
SCRATCH TESTING OF ZrN COATING ON TI-6AL-4V TITANIUM ALLOY SURFACE PRELIMINARY TREATED BY COMPRESSION PLASMA FLOWS IMPACT
ELECTRON-BEAM SINTERING OF ZIRCONIUM DIOXIDE/TITANIUM CERAMICS FOR MICROELECTRONICS PRODUCTS
THE EFFECT OF THE FLUORINE CONCENTRATION IN A PLASMA-FORMING GAS MIXTURE ON THE CHEMICAL COMPOSITION, SURFACE CHARGE, AND RELIEF PARAMETERS OF FLUOROCARBON COATINGS ON PET
PREPARATION AND THERMOELECTRIC PROPERTIES OF p-TYPE Ag(1-x)Cu(1+x)Te SAMPLES BY SPARK PLASMA SINTERING METHOD
将发表的论文
PLASMA DISCHARGE IN LIQUID MEDIA UNDER THE EFFECT OF ULTRASOUND FOR THE SYNTHESIS OF FILLERS FOR POLYMER COMPOSITES WITH ENHANCED MECHANICAL STRENGTH AND GAS PERMEABILITY
THE QUALITY OF THIN-WALLED STRUCTURES OF AlSi10Mg PRODUCED BY SELECTIVE LASER MELTING
PHYSICAL AND MECHANICAL PROPERTIES AND OPERATIONAL CHARACTERISTICS OF CORONA SPRAYED POWDER COATINGS
Increasing the wear resistance of titanium alloys by deposition of a modifying coating (Zr,Nb)N
Electron-beam synthesis of zirconia ceramic coatings in the forevacuum pressure range
Preparation and Thermoelectric Properties of P-type Ag(1-x)Cu(1+x)Te Samples by SPS Method
The effect of the fluorine concentration in a plasma-forming gas mixture on the chemical composition, surface charge and relief parameters of fluorocarbon coatings on PET
Electron beam sintering of zirconium dioxide/titanium ceramics for microelectronics products