图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
传热学
影响因子: 0.404 5年影响因子: 0.8 SJR: 0.264 SNIP: 0.504 CiteScore™: 0.88

ISSN 打印: 1064-2285
ISSN 在线: 2162-6561

传热学

DOI: 10.1615/HeatTransRes.2018019220
pages 899-914

EXPERIMENTAL STUDY OF ORGANIC RANKINE CYCLE SYSTEM USING SCROLL EXPANDER AND DIAPHRAGM PUMP AT DIFFERENT CONDENSING TEMPERATURES

Huan Xi
Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China
Hong-Hu Zhang
Key Laboratory of Thermo-Fluid Science and Engineering of Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China
Ya-Ling He
Key Laboratory of Thermo-fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China

ABSTRACT

A small-scale RORC (organic Rankine cycle with a regenerator) system using a scroll expander and a diaphragm pump has been built. By using R123 as the working fluid, the expander, pump, and system performances are measured under different condensing temperatures. The maximum shaft power output of the expander obtained in this work is about 700 W. By increasing the shaft torque of the expander, the isentropic efficiency of the expander first increases and then decreases. The pressure ratio increases with increase of the shaft torque of the expander. The expander shows a highest shaft power output with the filling factor reaching 0.6—0.7. When Tc increases, both the pump work consumption and the pressure difference of the pump show an increasing trend, leading to an increase in the mass flow rate of the working fluid, which is the main reason for the increase of the shaft power output of the expander. The obtained minimum BWR is about 0.46, the maximum electricity efficiency of the pump is 34.2%. The maximum thermal and exergy efficiencies are 2.4% and 9.3%, respectively.


Articles with similar content:

MODELLING OF ADVANCED COMBINED HEAT AND POWER SYSTEMS IN BUILDING APPLICATIONS
Second Thermal and Fluids Engineering Conference, Vol.14, 2017, issue
Maria Anna Chatzopoulou, Christos N. Markides
EFFECT OF CHANGES IN INPUT PARAMETERS ON THE OPERATION OF A MED-TVC PLANT
3rd Thermal and Fluids Engineering Conference (TFEC), Vol.9, 2018, issue
Ramy H. Mohammed, Osama Mesalhy, Mohamed L. Elsayed, Louis C. Chow
An Investigation on Operating Limit of an Oscillating Heat Pipe
International Heat Transfer Conference 15, Vol.22, 2014, issue
Hongbin Ma, Chao Chang, Gen Li, Yulong Ji
PERFORMANCE INDEX OF THE HDH DESALINATION UNIT DRIVEN BY NANOFLUID BASED SOLAR COLLECTOR
4th Thermal and Fluids Engineering Conference, Vol.10, 2019, issue
Sarit Kumar Das, Vikrant Khullar, Himanshu Tyagi, Kapil Garg
EFFECTS OF HEATING AND COOLING CHARACTERISTICS ON THERMOELECTRIC GENERATOR PERFORMANCE
International Heat Transfer Conference 16, Vol.17, 2018, issue
Feng Wang, Bohong Chen, Long Wang, Penglai Li, Ling Yao