图书馆订阅: Guest
Begell Digital Portal Begell 数字图书馆 电子图书 期刊 参考文献及会议录 研究收集
国际能源材料和化学驱动期刊
ESCI SJR: 0.149 SNIP: 0.16 CiteScore™: 0.29

ISSN 打印: 2150-766X
ISSN 在线: 2150-7678

国际能源材料和化学驱动期刊

DOI: 10.1615/IntJEnergeticMaterialsChemProp.2018021842
pages 81-101

FUEL-RICH ALUMINUM−METAL FLUORIDE THERMITES

Siva Kumar Valluri
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Ian Monk
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Mirko Schoenitz
New Jersey Institute of Technology, Newark, New Jersey 07102, USA
Edward L. Dreizin
New Jersey Institute of Technology, Newark, New Jersey 07102, USA; Tomsk State University, Tomsk, 634050, Russia

ABSTRACT

Nanocomposite thermite powders using aluminum as fuel with cobalt and bismuth fluorides as oxidizers were prepared by arrested reactive milling. Each material contained 50 wt% of aluminum and 50 wt% of a fluoride, resulting in fuel-rich compositions. The reactions in the prepared powders were characterized by thermo-analytical measurements; powders were ignited as coatings on an electrically heated filament and by electrostatic discharge. It was observed that the exothermic reactions begin in aluminum–metal fluoride thermites at lower temperatures than in any previously prepared reactive nanocomposites based on aluminum. Redox reactions in Al·CoF2 and Al·BiF3 nanocomposite started around 200 and 250°C, respectively. The results suggest that the initial reactions are rate-limited by the decomposition of fluorides. In the oxygenated environments, metals generated by reducing the starting fluorides oxidize readily. The newly formed oxides are rapidly reduced by excess aluminum, accelerating aluminum oxidation at low temperatures. The low-temperature thermally activated reactions lead to low ignition temperatures for the powders heated on the filament. Despite the low ignition temperatures, both prepared materials were relatively insensitive to ignition by an electric spark, making them attractive components of advanced energetic formulations.


Articles with similar content:

PREPARATION AND CHARACTERIZATION OF GRANULAR HYBRID REACTIVE MATERIALS
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 3
Yasmine Aly, Alexandre Ermoline, Mikhaylo A. Trunov, Mirko Schoenitz, Edward L. Dreizin
ON GAS RELEASE BY THERMALLY-INITIATED FULLY-DENSE 2Al·3CuO NANOCOMPOSITE POWDER
International Journal of Energetic Materials and Chemical Propulsion, Vol.11, 2012, issue 3
Alexandre Ermoline, Mirko Schoenitz, Edward L. Dreizin, Rayon A. Williams
REDUCED AGGLOMERATION RESULTING FROM NICKEL COATING OF ALUMINUM PARTICLES IN SOLID PROPELLANTS
International Journal of Energetic Materials and Chemical Propulsion, Vol.9, 2010, issue 6
Alon Gany, Yinon Yavor, Valery Rosenband
ENHANCED REACTIVITY OF ALUMINUM POWDERS BY CAPPING WITH A MODIFIED GLYCIDYL AZIDE POLYMER
International Journal of Energetic Materials and Chemical Propulsion, Vol.15, 2016, issue 6
Ricardo José Pontes Lima, Robert Stowe, Sophie Ringuette, Charles Dubois
Ignition and Combustion Behavior of MTV Igniter Materials for Base Bleed Applications
International Journal of Energetic Materials and Chemical Propulsion, Vol.1, 1991, issue 1-6
T. S. Snyder, B. L. Fetherolf, Dah-Ming Chen, T. A. Litzinger